Hi Peng,
On Mon, May 4, 2020 at 11:50 PM Peng Fan <peng....@nxp.com> wrote:
> Busfreq could be disabled by set the device tree node to disabled.
This does not help. If I use the NXP U-Boot I can boot the NXP 5.4.3
without problems.
> > I have also tried to boot NXP 5.4.3 on a i.MX8MM EVK with the latest U-Boot
> > and I also observe a hang.
>
> I'll give a try tomorrow when I back to office. There is a ARM clock issue
> that
> could cause all i.MX8M kernel hang, but that should be a bit late, should not
> be that early just after console enabled.
Currently, we can not even boot to the U-Boot prompt with mainline U-Boot.
Reverting f24dea4e1b ("ARM: imx8m: Fix reset in SPL on NXP iMX8MP
EVK") allows it to boot again.
As discussed in the other thread, this means that the i.MX8MP clock
driver is broken.
Please let me know if you can look at these issues.
Thanks
