Dear Wolfgang Denk,
>
> I see the misunderstanding here:
>
>> It will be needed to replace the "#if defined(CONFIG_AT91SAM9260) ||
>> defined(CONFIG_AT91SAM9XE)" in global_data.h and a ton of similar
>> ocurrences like these:
>
> That does not exist yet (its only in my local tree so far!)
>
>> arch/arm/cpu/arm926ejs/at91/clock.c:#if defined(CONFIG_AT91SAM9G45) ||
>> defined(CONFIG_AT91SAM9M10G45)
>> arch/arm/cpu/arm926ejs/at91/clock.c:#elif defined(CONFIG_AT91SAM9G45) ||
>> defined(CONFIG_AT91SAM9M10G45)
>> Careful here, the ones here are distinguishing between different "family"
>> members!
>> See the abundance of #elif's there!
The actual example code:
#if defined(CONFIG_AT91RM9200)
/* mdiv */
gd->mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
#elif defined(CONFIG_AT91SAM9G20)
/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
if (mckr & AT91_PMC_MCKR_MDIV_MASK)
freq /= 2; /* processor clock division */
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
(AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
? freq / 3
: freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
#else
gd->mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
#endif
Note: I did not write that code, and I am sure it could be made to look less
obfuscated. But that's not my problem right now.
I looked at common.h which is already overcrowded by arch and even
board specifics. I don't want to add anything there. In my tree I have
solved the issue as follows:
1. The board's config file defines "CONFIG_AT91FAMILY" like this:
/* SoC */
#define CONFIG_ARM926EJS 1 /* ARM926EJS Core */
#define CONFIG_AT91FAMILY 1 /* it's a member of AT91 */
#define CONFIG_AT91SAM9260 1 /* Atmel AT91SAM9260 based SoC */
#define CONFIG_AT91SAM9XE 1 /* more specific: AT91SAM9XE */
2. both at91 clock.c and timer.c contain the statements:
#if !defined(CONFIG_AT91FAMILY)
# error You need to define CONFIG_AT91FAMILY in your board config!
#endif
This will catch all boards that are affected. Since all ARM/AT91 boards
are broken right now anyway and need fixing their config file that
should work fine.
3. arm/global_data.h has now:
...
#endif
#ifdef CONFIG_AT91FAMILY
/* "static data" needed by at91's clock.c */
unsigned long cpu_clk_rate_hz;
unsigned long main_clk_rate_hz;
unsigned long mck_rate_hz;
unsigned long plla_rate_hz;
unsigned long pllb_rate_hz;
unsigned long at91_pllb_usb_init;
/* "static data" needed by at91's timer.c */
unsigned long timer_rate_hz;
unsigned long tbl;
unsigned long tbu;
unsigned long long timer_reset_value;
#endif
#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
...
I can now post this as a patch.
Best Regards
Reinhard
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
