From: Nick Hawkins <nick.hawk...@hpe.com> Add the include file for the gxp soc.
Signed-off-by: Nick Hawkins <nick.hawk...@hpe.com> --- include/configs/gxp.h | 96 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 include/configs/gxp.h diff --git a/include/configs/gxp.h b/include/configs/gxp.h new file mode 100644 index 0000000000..601d6e405d --- /dev/null +++ b/include/configs/gxp.h @@ -0,0 +1,96 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * GXP board + * + * (C) Copyright 2022 Hewlett Packard Enterprise Development LP. + * Author: Nick Hawkins <nick.hawk...@hpe.com> + * Author: Jean-Marie Verdun <ver...@hpe.com> + */ + +#ifndef _GXP_H_ +#define _GXP_H_ + +#define CONFIG_SKIP_LOWLEVEL_INIT + +#define CONFIG_SYS_MALLOC_LEN 0x4000000 +#define CONFIG_SYS_INIT_SP_ADDR 0x2000000 + +#ifdef CONFIG_TARGET_GXP +#ifdef CONFIG_GXP_ECC + #define CONFIG_SYS_SDRAM_SIZE 0x0f800000 +#else + #define CONFIG_SYS_SDRAM_SIZE 0x1f000000 +#endif + +#ifdef CONFIG_GXP_VROM_64MB + #undef CONFIG_SYS_SDRAM_SIZE + #ifdef CONFIG_GXP_ECC + #define CONFIG_SYS_SDRAM_SIZE 0x0c000000 + #else + #define CONFIG_SYS_SDRAM_SIZE 0x18000000 + #endif +#endif + +#ifdef CONFIG_GXP_VROM_32MB + #undef CONFIG_SYS_SDRAM_SIZE + #ifdef CONFIG_GXP_ECC + #define CONFIG_SYS_SDRAM_SIZE 0x0e000000 + #else + #define CONFIG_SYS_SDRAM_SIZE 0x1c000000 + #endif +#endif +#endif + +#ifdef CONFIG_TARGET_GXP2 + #define CONFIG_SYS_SDRAM_SIZE 0x1b200000 + +#ifdef CONFIG_GXP_VROM_64MB + #undef CONFIG_SYS_SDRAM_SIZE + #define CONFIG_SYS_SDRAM_SIZE 0x14000000 +#endif + +#ifdef CONFIG_GXP_VROM_32MB + #undef CONFIG_SYS_SDRAM_SIZE + #define CONFIG_SYS_SDRAM_SIZE 0x18000000 +#endif +#endif + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_LOAD_ADDR 0x40100000 +#define CONFIG_BOOTCOMMAND "run spiboot" +//#define CONFIG_SYS_BOOTM_LEN 0xC00000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "recover_file=openbmc-hpe-recovery-image.mtd\0" \ + "recover_cmd=usb start; " \ + "mw.b 0xD100000D 0x40; " \ + "if fatload usb 0 0x50000000 $recover_file 0x4C0000 0x80000; then " \ + "setenv bootargs console=ttyS0,115200 recovery; " \ + "setenv force_recovery; " \ + "saveenv; " \ + "bootm 0x50000000; " \ + "else " \ + "while itest 0 < 1; do " \ + "mw.b 0xd1000005 0xc0; " \ + "sleep .1; " \ + "mw.b 0xd1000005 0x00; " \ + "sleep .1; " \ + "done; " \ + "fi; " \ + "reset;\0" \ + "spiboot=if itest.b *0xD10000B2 == 6; then " \ + "run recover_cmd;" \ + "fi;" \ + "if printenv force_recovery; then " \ + "run recover_cmd; " \ + "else " \ + "bootm 0xfc080000; " \ + "run recover_cmd; " \ + "fi;\0" + +/*--------------------------------------------------------------------------*/ +/* Network Configuration */ +/*--------------------------------------------------------------------------*/ +#define CONFIG_PHY_ADDR 0 + +#endif -- 2.17.1
