Hola all -
Some more details might help.
Are you in Universe ?
Yes, that's where it's failing. From the TCL prompt, SP-ASSIGN F24 & the
printing output seems to work fine, but from within the programs, it's
not so good.
If so, what does your record for the printer look
like in the &DEVICE& file ?
|
| Printer Name : pr24 Baud Rate : 9600
|
| Pathname ? /dev/null Parity : NONE
|
| Driver : /usr/spool/uv/pr.PR24 CR Mode : None
|
| Form : 24 Tab Expansion : OFF
|
| Flow control : FF Delay : No formfeed
|
| Enable Printing : Y LF Delay : None
|
| Enable Queuing : Y Word Length : 8
|
| Lock file 1 : PR24
|
| Lock file 2 :
|
| Other Options : LF to CR/LF
|
> What does your 'driver' look like ?
lp -dVHP1101PRT1 (works for most other printers/forms, only 24 & 25 are
giving us problems)
Exactly what kind of printer is it that you are using ?
Well we've tried it on a couple, HP LJ 8150 is the 'true' destination,
and an HP LJ 4200 we're using for testing, which again work fine for
most other print jobs, just not (so far) for these particular forms.
I've been able to replicate this on another test system as well.
Inside the code, the programmer is using SETPTR as oppposed to SP-ASSIGN
as in:
ED MD SETF24
0001: PQ
0002: HSETPTR 0,80,59,0,0,1,FORM 24,NOHEAD,BRIEF
0003: P
Same code works aces on the current uv 9.6 on Irix 6.5 system against
the same printer, bails entirely on the uv 10.1.4 / RH 3.5 systems.
U2 tech support & the programmers are looking into this, unfortunately
he's a consultant & typically here only once a week.
Many, many thanks for your help.
--
Peter Ivanick
Sr. Programmer/Analyst
School of Veterinary Medicine, University of Pennsylvania
Email: [EMAIL PROTECTED]
Phone: 215.573.2306 Fax: 215.573.8777
http://www.vet.upenn.edu/
-------
u2-users mailing list
u2-users@listserver.u2ug.org
To unsubscribe please visit http://listserver.u2ug.org/
