Wow! On Sat, Nov 18, 2017 at 12:46 PM, David Jones <d...@nglconnection.com> wrote:
> That was a 5ghz. I have elevated some NS2's. Here is a NS2 with a > reflector dish at 14.8 miles getting about 62mbps down. I am really > impressed with what I can now get from the 2ghz. > > On Fri, Nov 17, 2017 at 7:18 PM, RickG <rgunder...@gmail.com> wrote: > >> Ha-vent had any issues with the Rocket Prism 5GHz but the "XM" firmware >> 2.4GHz CPE not so much ;( >> >> On Fri, Nov 17, 2017 at 6:33 PM, David Jones <d...@nglconnection.com> >> wrote: >> >>> We tried an AC with MM sync And the performance is worse than just mixed >>> mode. It may have to do with the clients that have poor signal. With an >>> elevated XM I can pull 70mbps at a -73 signal with 60 other people >>> connected to the AP on a 40mhz channel. with a - 64 signal I can pull >>> 94mbps maxing out the 100mbps port. an XW on the same sector can pull about >>> 127mbps tcp throughput. >>> No matter what I tried with UBNT I could not get my legacy devices to >>> pull more than 40mbps TCP on a sector with more than 35 devices connected. >>> sure its udp test showed 85mbps+ but the TCP was barely half that. With the >>> cambium tests the TCP is usually within 5% of it. >>> >>> We have also had problems with random UDP packets going missing and it >>> causes problems with VOIP and gamers. its not the connection quality >>> because we can use a VPN and magically the udp didn't disappear. adding the >>> latency and overhead improved the VOIP and UDP based games. >>> >>> Going Forward we may have places that pure AC may work well but for any >>> of the old M equipment nothing beats an ePMP2000 with elevated firmware. >>> >>> On Fri, Nov 17, 2017 at 1:38 PM, J Portman <ba...@baron.com> wrote: >>> >>>> Just as a data point, we upgraded one of our towers to run sync in >>>> mixed mode a few weeks ago and it has performed flawlessly. >>>> >>>> We are getting ready to roll sync out to the entire network (60+ APS). >>>> I will report on our progress. >>>> >>>> YMMV, >>>> JP >>>> >>>> >>>> *On Fri, 17 Nov 2017 19:56:17 +0000, Rory Conaway wrote* >>>> > Understood. With the [UTF-8?]Prism’s handling multi-mode, have you >>>> considered that option? >>>> > >>>> > Rory >>>> > >>>> > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-bounces@wis >>>> pa.org] *On Behalf Of *David Jones >>>> > *Sent:* Friday, November 17, 2017 12:21 PM >>>> > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >>>> > *Subject:* Re: [Ubnt_users] aircontrol won't find 6.0.4 devices >>>> > >>>> > >>>> > Well for us it is because we are elevating our units. I also hate the >>>> locked firmware at and after 6.0.6 >>>> > >>>> > >>>> > >>>> > On Fri, Nov 17, 2017 at 10:21 AM, Rory Conaway < >>>> r...@triadwireless.net> wrote: >>>> >>>> >>>> > >>>> > Why are you still running 6.0.4? >>>> > >>>> > Rory >>>> > >>>> > >>>> > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-bounces@wis >>>> pa.org] *On Behalf Of *Troy Gibson, Byhalia.net,LLC >>>> > *Sent:* Friday, November 17, 2017 5:31 AM >>>> > >>>> > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >>>> > *Subject:* Re: [Ubnt_users] aircontrol won't find 6.0.4 devices >>>> > >>>> > >>>> > >>>> > Beta 6 or 7 still does not find 6.0.4. I have had to go through my >>>> system to find missing CPE's or APs that were on 6.0.4 Downgraded to >>>> 5.6.15 for them to be found as I was unsure of the higher 6.0 firmware at >>>> the time. >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Troy Gibson >>>> > >>>> > >>>> > >>>> > Sent from my Verizon, Samsung Galaxy smartphone >>>> > >>>> > >>>> > >>>> > -------- Original message -------- >>>> > >>>> > From: RickG <rgunder...@gmail.com> >>>> > >>>> > Date: 11/17/17 4:51 AM (GMT-05:00) >>>> > >>>> > To: Ubiquiti Users Group <ubnt_users@wispa.org> >>>> > >>>> > Subject: Re: [Ubnt_users] aircontrol won't find 6.0.4 devices >>>> > >>>> > >>>> > >>>> > The beta works better. >>>> > >>>> > >>>> > >>>> > On Thu, Nov 16, 2017 at 1:48 PM, Phil Curnutt <pcurn...@gmail.com> >>>> wrote: >>>> >>>> >>>> > >>>> > AirControl2 2.0.3 is found on Ubnt.com, >>>> > Support>Downloads>AirMax>Utilities. >>>> Your have choices of Linux or Windows10 Servers and Clients and Mac >>>> Clients. I found our 900 radios on 5.6.9, but not the one on 6.0.4, but I >>>> was able to add the device manually using v 2.0.2. >>>> > >>>> > >>>> > >>>> > Phil >>>> > >>>> > >>>> > >>>> > On Thu, Nov 16, 2017 at 11:18 AM, Jan Van Kort < >>>> j.vank...@oregononline.net> wrote: >>>> >>>> >>>> > >>>> > I had an earlier version of air control installed and gave up trying >>>> to make it work over 2 years ago. Where do i go to get a current version >>>> of air control so I can try it again? I'm wandering around the >>>> ubnt.com website and can't find it. Does the current version have the >>>> 6.04 issue? >>>> > >>>> > >>>> > On 08/31/2017 11:05 AM, James Craig via Ubnt_users wrote: >>>> >>>> >>>> > >>>> > Hi Guys, >>>> > >>>> > >>>> > >>>> > This is most likely due to this change in discovery in 6.0.4. We're >>>> adding CGN address space in 6.0.7, so moving forward, you will only be able >>>> to discover from RFC1918 and RFC6598 address. IP range scanning should >>>> still work. >>>> > >>>> > >>>> > >>>> >>>> - Fix: Limit discovery response to queries from private >>>> subnets or >>>> multicast/broadcast >>>> >>>> >>>> > >>>> > >>>> > >>>> > On Thu, Aug 31, 2017 at 1:58 PM, Troy Gibson, Byhalia.net,LLC < >>>> t...@byhalia.net> wrote: >>>> >>>> >>>> > >>>> > I'm on AC2.1 beta 7 and it won't find any 6.0.4 radios, XW or XM. I >>>> had some being monitored on beta 6, so those are still monitored, but show >>>> in devices not found column of discovery. TCP scan only showed prism >>>> radios too. >>>> > >>>> > >>>> > >>>> > I downgraded to 5.6.15 and it was discovered. I had to downgrade AP >>>> and CPE for it to discover the devices on AC. Now to search for the missing >>>> radios!! >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Troy >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Sent from my Verizon, Samsung Galaxy smartphone >>>> > >>>> > >>>> > >>>> > -------- Original message -------- >>>> > >>>> > From: CBB - Jay Fuller <par...@cyberbroadband.net> >>>> > >>>> > Date: 8/31/17 1:25 PM (GMT-05:00) >>>> > >>>> > To: Ubiquiti Users Group <ubnt_users@wispa.org> >>>> > >>>> > Subject: [Ubnt_users] aircontrol won't find 6.0.4 devices >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Been reading all about it in the ubnt forums - but anyone have any >>>> suggestions around this? >>>> > >>>> > >>>> > >>>> > Thought I'd post it here too - >>>> > >>>> > >>>> > >>>> > Haven't run aircontrol since about 18 months ago. About nine months >>>> ago I attempted to upgrade to the then current beta but it basically >>>> corrupted my database and would not even start the server service. Last >>>> night late I started over again from scratch. Ran into the 6.0.4 problem >>>> as one of my network segments (from a recent purchase) we have manually >>>> changed the ip addresses and put them all on 6.0.4 >>>> > >>>> > >>>> > >>>> > >>>> > A different segment is still running 5.6.3. I was planning to move >>>> them all to 6.0.4 and also make a mass change of the username / password. >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Left discovering overnight, found all the devices on 5.6.3 on that >>>> particular network segment but did not find any 6.0.4 >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Today once googling and discovering this issue I downgraded an AP >>>> from 6.0.4 to 5.6.3 and discovery found it immediately. >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > I don't want to do this to 300 devices. >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Aircontrol v.2.0.2.2874.170719.18353 is running on a public IP >>>> within our network. >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > I tried to new feature tcp scan but no luck (probably because the >>>> server is in public ip space). >>>> > >>>> > >>>> > >>>> > >>>> > I thought about temporarily changing the IP but then radios would be >>>> reporting to the wrong IP. >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > I can manually add the device but have not found a way to do that in >>>> bulk. >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > I don't know if it is easier for me to upgrade to something higher >>>> than 6.0.4 on all of my devices and use discovery or to manually add 300+ >>>> devices. I am hoping for another option. >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Bueller? Bueller? >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Thanks >>>> > >>>> > _______________________________________________ >>>> > Ubnt_users mailing list >>>> > Ubnt_users@wispa.org >>>> > http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> >>>> >>>> > >>>> > >>>> >>>> _______________________________________________ >>>> >>>> Ubnt_users mailing >>>> list >>>> >>>> Ubnt_users@wispa.org >>>> >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> >>>> >>>> > >>>> > >>>> > _______________________________________________ >>>> > Ubnt_users mailing list >>>> > Ubnt_users@wispa.org >>>> > http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> >>>> >>>> > >>>> > >>>> > _______________________________________________ >>>> > Ubnt_users mailing list >>>> > Ubnt_users@wispa.org >>>> > http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> >>>> >>>> > >>>> > >>>> >>>> > >>>> > >>>> > -- >>>> > >>>> > -RickG >>>> > >>>> > _______________________________________________ >>>> > Ubnt_users mailing list >>>> > Ubnt_users@wispa.org >>>> > http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> >>>> >>>> > >>>> > >>>> >>>> > >>>> > >>>> > -- >>>> > >>>> > David Jones >>>> > NGL Connection >>>> > 307-288-5491 <(307)%20288-5491> ext 702 >>>> >>>> >>>> Joe Portman >>>> Alamo Broadband Inc. >>>> www.alamobroadband.com >>>> >>>> _______________________________________________ >>>> Ubnt_users mailing list >>>> Ubnt_users@wispa.org >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> >>>> >>> >>> >>> -- >>> David Jones >>> NGL Connection >>> 307-288-5491 ext 702 <(307)%20288-5491> >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >> >> >> -- >> -RickG >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > > > -- > David Jones > NGL Connection > 307-288-5491 ext 702 > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- -RickG
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users