Lo, On Wed, 10 Aug 2005 18:22:15 +0200, Bjoern Schmidt wrote > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hello, i use your kernel patch from 2005-07-25 20:19:25 against kernel > 2.6.13-rc1, the usbatm iso patch and the firmware from > http://castet.matthieu.free.fr/eagle/release/ueagle-data-1.0.tar.gz
there's 1.0b version at http://castet.matthieu.free.fr/eagle/release/ or you may use svn version (with Makefile in directory driver/ ) see http://svn.gna.org/viewcvs/ueagleatm/trunk/ what gives ls -lR /usr/lib/hotplug/firmware/ ? > The Modem is an AT-AR215 (Annex B) this result of diag is fine (your attenuation is correct at 31dB and margin ok too, should not be a problem). > ====================== does work for a few seconds > > Driver version 1.0 Chipset: Eagle1 > Vendor ID : 0x1110 Product ID : 0x900f Rev: 0x408b(isdn) > USB Bus : 002 USB Device : 003 Dbg : 0x0 > VID-CPE 28 VID-ITU 445600000000414e > > Tx Rate 160 Kps Rx Rate 1184 Kps > Tx Atten 31 dB Rx Atten 31 dB > Tx Margin 17 dB Rx Margin 29 dB > Tx Blocks 79350 Rx Blocks 79281 > Tx FEC 0 Rx FEC 138 > Tx Error 0 Rx Error 138 > Delin GOOD Flags 0000000000 > Modem is operational > usb 2-2: [UEAGLE-ATM] unexpected cmv received what CMV are you using ? not that many testers are using ISDN... usual case is POTS > usb 2-2: [UEAGLE-ATM] writing cmv failed with error -110 I hope this is not a problem with usb driver... @++ Ben'. aka baud123
