-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, i use your kernel patch from 2005-07-25 20:19:25 against kernel 2.6.13-rc1, the usbatm iso patch and the firmware from http://castet.matthieu.free.fr/eagle/release/ueagle-data-1.0.tar.gz
The Modem is an AT-AR215 (Annex B) In my tests the driver does not work reliable. What can i do? This is how i tested: All USB parts of the kernel are modules 1. Plug out the Modem 2. modprobe -r ueagle-atm 3. /etc/init.d/hotplug restart 4. Plug in the Modem Here is the output from all the tests, separated by (======================) ====================== does not work at all gigabyte:~# dmesg usb 2-2: new full speed USB device using uhci_hcd and address 2 [ueagle-atm] driver 1.0 loaded usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010) usb 2-2: reset full speed USB device using uhci_hcd and address 2 usb 2-2: [ueagle-atm] pre-firmware device, uploading firmware usb 2-2: [ueagle-atm] firmware uploaded usbcore: registered new driver ueagle-atm usb 2-2: USB disconnect, address 2 usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) usb 2-2: reset full speed USB device using uhci_hcd and address 3 usb 2-2: [ueagle-atm] using iso mode usb 2-2: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/002-003 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [ueagle-atm] modem synchronization failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] modem operational usb 2-2: [ueagle-atm] ATU-R firmware version : 40e4be96 gigabyte:~# cat /proc/driver/ueagle-atm/002-003 ueagle-atm status display - ------------------------------------------------------------- Driver version 1.0 Chipset: Eagle1 Vendor ID : 0x1110 Product ID : 0x900f Rev: 0x408b(isdn) USB Bus : 002 USB Device : 003 Dbg : 0x0 VID-CPE 0 VID-ITU 0 Tx Rate 0 Kps Rx Rate 0 Kps Tx Atten 0 dB Rx Atten 0 dB Tx Margin 0 dB Rx Margin 0 dB Tx Blocks 0 Rx Blocks 0 Tx FEC 0 Rx FEC 0 Tx Error 0 Rx Error 0 Delin GOOD Flags 0000000000 Modem is initializing ====================== does not work at all gigabyte:~# dmesg usb 2-2: new full speed USB device using uhci_hcd and address 2 [ueagle-atm] driver 1.0 loaded usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010) usb 2-2: reset full speed USB device using uhci_hcd and address 2 usb 2-2: [ueagle-atm] pre-firmware device, uploading firmware usb 2-2: [ueagle-atm] firmware uploaded usbcore: registered new driver ueagle-atm usb 2-2: USB disconnect, address 2 usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) usb 2-2: reset full speed USB device using uhci_hcd and address 3 usb 2-2: can't restore configuration #1 (error=-84) usb 2-2: [UEAGLE-ATM] setting any alternate failed for 2 interface, using bulk mode usb 2-2: [UEAGLE-ATM] urb submition failed with error -19 ueagle-atm: probe of 2-2:1.0 failed with error -12 usb 2-2: USB disconnect, address 3 usb 2-2: new full speed USB device using uhci_hcd and address 4 usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) usb 2-2: reset full speed USB device using uhci_hcd and address 4 usb 2-2: [ueagle-atm] using iso mode usb 2-2: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/002-004 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] uea_intr() failed with -84 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] (re)booting started gigabyte:~# cat /proc/driver/ueagle-atm/002-004 ueagle-atm status display - ------------------------------------------------------------- Driver version 1.0 Chipset: Eagle1 Vendor ID : 0x1110 Product ID : 0x900f Rev: 0x408b(isdn) USB Bus : 002 USB Device : 004 Dbg : 0x0 VID-CPE 0 VID-ITU 0 Tx Rate 0 Kps Rx Rate 0 Kps Tx Atten 0 dB Rx Atten 0 dB Tx Margin 0 dB Rx Margin 0 dB Tx Blocks 0 Rx Blocks 0 Tx FEC 0 Rx FEC 0 Tx Error 0 Rx Error 0 Delin GOOD Flags 0000000000 Modem is booting ====================== does not work at all usb 2-2: new full speed USB device using uhci_hcd and address 2 [ueagle-atm] driver 1.0 loaded usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010) usb 2-2: reset full speed USB device using uhci_hcd and address 2 usb 2-2: [ueagle-atm] pre-firmware device, uploading firmware usb 2-2: [ueagle-atm] firmware uploaded usbcore: registered new driver ueagle-atm usb 2-2: USB disconnect, address 2 usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: can't set config #1, error -84 usb 2-2: new full speed USB device using uhci_hcd and address 4 usb 2-2: unable to read config index 0 descriptor/start usb 2-2: can't read configurations, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 5 usb 2-2: can't set config #1, error -84 usb 2-2: new full speed USB device using uhci_hcd and address 6 usb 2-2: unable to read config index 0 descriptor/all usb 2-2: can't read configurations, error -71 ====================== does not work at all gigabyte:~# dmesg usb 2-2: new full speed USB device using uhci_hcd and address 2 [ueagle-atm] driver 1.0 loaded usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010) usb 2-2: reset full speed USB device using uhci_hcd and address 2 usb 2-2: [ueagle-atm] pre-firmware device, uploading firmware usb 2-2: [ueagle-atm] firmware uploaded usbcore: registered new driver ueagle-atm usb 2-2: USB disconnect, address 2 usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) usb 2-2: reset full speed USB device using uhci_hcd and address 3 usb 2-2: [ueagle-atm] using iso mode usb 2-2: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/002-003 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] reading cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] reading cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [ueagle-atm] modem synchronization failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] reading cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] reading cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] invalid DSP page 63 requested usb 2-2: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] wrong intr usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-2: [UEAGLE-ATM] uea_intr() failed with -84 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] usb_control_msg error -84 usb 2-2: [UEAGLE-ATM] sending DSP block 11 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] usb_control_msg error -84 usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] usb_control_msg error -71 usb 2-2: [UEAGLE-ATM] usb_control_msg error -71 usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] usb_control_msg error -71 usb 2-2: [UEAGLE-ATM] usb_control_msg error -71 usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed gigabyte:~# cat /proc/driver/ueagle-atm/002-003 ueagle-atm status display - ------------------------------------------------------------- Driver version 1.0 Chipset: Eagle1 Vendor ID : 0x1110 Product ID : 0x900f Rev: 0x408b(isdn) USB Bus : 002 USB Device : 003 Dbg : 0x0 VID-CPE 0 VID-ITU 0 Tx Rate 0 Kps Rx Rate 0 Kps Tx Atten 0 dB Rx Atten 0 dB Tx Margin 0 dB Rx Margin 0 dB Tx Blocks 0 Rx Blocks 0 Tx FEC 0 Rx FEC 0 Tx Error 0 Rx Error 0 Delin GOOD Flags 0000000000 Modem is booting ====================== does work for a few seconds gigabyte:~# dmesg usb 2-2: new full speed USB device using uhci_hcd and address 2 [ueagle-atm] driver 1.0 loaded usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010) usb 2-2: reset full speed USB device using uhci_hcd and address 2 usb 2-2: [ueagle-atm] pre-firmware device, uploading firmware usb 2-2: [ueagle-atm] firmware uploaded usbcore: registered new driver ueagle-atm usb 2-2: USB disconnect, address 2 usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) usb 2-2: reset full speed USB device using uhci_hcd and address 3 usb 2-2: [ueagle-atm] using iso mode usb 2-2: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/002-003 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [ueagle-atm] modem synchronization failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] modem operational usb 2-2: [ueagle-atm] ATU-R firmware version : 40e4be96 gigabyte:~# cat /proc/driver/ueagle-atm/002-003 ueagle-atm status display - ------------------------------------------------------------- Driver version 1.0 Chipset: Eagle1 Vendor ID : 0x1110 Product ID : 0x900f Rev: 0x408b(isdn) USB Bus : 002 USB Device : 003 Dbg : 0x0 VID-CPE 28 VID-ITU 445600000000414e Tx Rate 160 Kps Rx Rate 1184 Kps Tx Atten 31 dB Rx Atten 31 dB Tx Margin 17 dB Rx Margin 29 dB Tx Blocks 79350 Rx Blocks 79281 Tx FEC 0 Rx FEC 138 Tx Error 0 Rx Error 138 Delin GOOD Flags 0000000000 Modem is operational ...A FEW SECONDS LATER gigabyte:~# dmesg usb 2-2: new full speed USB device using uhci_hcd and address 2 [ueagle-atm] driver 1.0 loaded usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010) usb 2-2: reset full speed USB device using uhci_hcd and address 2 usb 2-2: [ueagle-atm] pre-firmware device, uploading firmware usb 2-2: [ueagle-atm] firmware uploaded usbcore: registered new driver ueagle-atm usb 2-2: USB disconnect, address 2 usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) usb 2-2: reset full speed USB device using uhci_hcd and address 3 usb 2-2: [ueagle-atm] using iso mode usb 2-2: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/002-003 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [ueagle-atm] modem synchronization failed usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] modem operational usb 2-2: [ueagle-atm] ATU-R firmware version : 40e4be96 usb 2-2: [UEAGLE-ATM] invalid cmv received, wPreamble 0, bDirection 0 usb 2-2: [UEAGLE-ATM] reading cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] reading cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] invalid DSP page 63 requested usb 2-2: [UEAGLE-ATM] reading cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] uea_intr() failed with -84 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [ueagle-atm] (re)booting started gigabyte:~# cat /proc/driver/ueagle-atm/002-003 ueagle-atm status display - ------------------------------------------------------------- Driver version 1.0 Chipset: Eagle1 Vendor ID : 0x1110 Product ID : 0x900f Rev: 0x408b(isdn) USB Bus : 002 USB Device : 003 Dbg : 0x0 VID-CPE 0 VID-ITU 0 Tx Rate 0 Kps Rx Rate 0 Kps Tx Atten 0 dB Rx Atten 0 dB Tx Margin 0 dB Rx Margin 0 dB Tx Blocks 0 Rx Blocks 0 Tx FEC 0 Rx FEC 0 Tx Error 0 Rx Error 0 Delin GOOD Flags 0000000000 Modem is booting ====================== Sometimes i get errors like these: usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] usb_control_msg error -71 usb 2-2: [UEAGLE-ATM] usb_control_msg error -71 usb 2-2: [UEAGLE-ATM] usb_control_msg error -71 usb 2-2: [UEAGLE-ATM] usb_control_msg error -84 usb 2-2: [UEAGLE-ATM] usb_control_msg error -71 usb 2-2: [UEAGLE-ATM] sending DSP block 0 failed usb 2-2: [ueagle-atm] (re)booting started OR: usb 2-2: [UEAGLE-ATM] unexpected cmv received usb 2-2: [UEAGLE-ATM] invalid cmv received, wPreamble 0, bDirection 0 usb 2-2: [UEAGLE-ATM] invalid DSP page 255 requested usb 2-2: [UEAGLE-ATM] reading cmv failed with error -110 usb 2-2: [ueagle-atm] (re)booting started usb 2-2: [UEAGLE-ATM] unexpected cmv received - -- Greets Bjoern Schmidt -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFC+im3LR9iDVPSetsRAhSdAKCL3m3l5n4BEmlN26yUQ1oMIMEoPwCdFPul tytCWgd1pjg5r/q4mn3B39M= =Rn47 -----END PGP SIGNATURE-----
