garrettwp wrote: > Here is the output: > > CMEDIA USB2.0 High-Speed True HD Audio at usb-bcm2708_usb-1.2, high > speed : USB Audio > > Playback: > Status: Running > Interface = 1 > Altset = 2 > URBs = 7 [ 7 7 7 8 7 7 8 ] > Packet Size = 208 > Momentary freq = 44105 Hz (0x5.8360) > Feedback Format = 16.16 > Interface 1 > Altset 1 > Format: S16_LE > Channels: 2 > Endpoint: 5 OUT (ASYNC) > Rates: 44100, 48000, 88200, 96000, 192000 > Data packet interval: 125 us > Interface 1 > Altset 2 > Format: S32_LE > Channels: 2 > Endpoint: 5 OUT (ASYNC) > Rates: 44100, 48000, 88200, 96000, 192000 > Data packet interval: 125 us > Interface 1 > Altset 3 > Format: S32_LE > Channels: 2 > Endpoint: 5 OUT (ASYNC) > Rates: 44100, 48000, 88200, 96000, 192000 > Data packet interval: 125 us > > - Garrett > > I also wanted to add that similar issues were happening when using the > hdmi port of the raspberry pi and my yamaha receiver. My other usb dac > which only does 16/44.1k over usb sounds fine. It now looks like normal > playback when the new dac reports 44.1k sounds slightly distorted and > crackly. Not sure what is going on.
Difficult to say - can you use aplay with it ok? What if you make the output device plughw:CARD=Audio,DEV=0 ------------------------------------------------------------------------ Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
