OGS wrote: > I've tested squeezelite on a couple of laptops booting the latest > live-cd from voyage-mpd. Works perfectly. Sound card is a Stello U3 > USB-S/PDIF concerter (XMOS). I started to wonder which Linux distro and > hardware I should get to set up a permanent solution. An alix board with > the Voyage distro seemed to be a good candidate. Then I remebered that > the Touch is a Linux box and at the same time I noticed posts from > Triode and soundcheck talking about running squeezelite on the Touch. I > tested this successfully with the Stello last night (Touch with v7.8 and > EDO). I had to set buffer time high to avoid clicks and skips (-a > 50000:4::0). 50000:4 is probably more than needed but I could play > 24/192 material with no problem and did not test further. I did set the > mmap off, but I am not sure this is the right setting. Also squeezelite > -l does not print the list of devices on the Touch. aplay -l does so I > used that info. > Triode: would you mind posting parameters that you believe should work > for Touch and current version of squeezelite?
As long as you don't have default settings (no tuning) then squeezelite should run on Touch without changing buffer sizes using the hw:CARD=TXRX output. It will need the EDO kernel if you want to get to 192k though. Note that there is a complexity of what to do with the standard jive process - you either need to kill it or make it use an alternative output interface. [killing it causes problems with the watchdog kicking in though - can't remember the command to stop that from memory] ------------------------------------------------------------------------ Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix