Mode 4 is LACP.

So the switches must be talking LACP.



> On 5 Feb 2020, at 18:28, eev...@digitaldatatechs.com wrote:
> 
> I tried to set lags but it killed communication altogether. So no they are 
> not.
> 
> Eric Evans
> Digital Data Services LLC.
> 304.660.9080
> 
> 
> -----Original Message-----
> From: Vinícius Ferrão <fer...@versatushpc.com.br> 
> Sent: Wednesday, February 05, 2020 3:55 PM
> To: eev...@digitaldatatechs.com
> Cc: users@ovirt.org
> Subject: [ovirt-users] Re: Deploy Hosted Engine fails at "Set VLAN ID at 
> datacenter level"
> 
> The switches are configured for LACP Active mode?
> 
> 
>> On 5 Feb 2020, at 17:40, eev...@digitaldatatechs.com wrote:
>> 
>> I have a hypervisor with nic bonding in place and it has some communication 
>> issues. It constantly goes up and down and into non operational mode but 
>> comes back up. Is there a fix for this? Using Mode 4 for bonding.
>> 
>> Eric Evans
>> Digital Data Services LLC.
>> 304.660.9080
>> 
>> 
>> -----Original Message-----
>> From: clam2...@gmail.com <clam2...@gmail.com>
>> Sent: Wednesday, February 05, 2020 12:48 PM
>> To: users@ovirt.org
>> Subject: [ovirt-users] Re: Deploy Hosted Engine fails at "Set VLAN ID at 
>> datacenter level"
>> 
>> Thank you Guillaume!  My mistake.  Resolved.
>> 
>> I am now having further issues I believe to be because I am using tagged 
>> VLANs with NIC teaming.  It appears that teaming is not well supported in 
>> oVirt - is that accurate, and that I should rebuild using bonds.  If you 
>> have any experience to shed light on this it is much appreciated.
>> 
>> [ INFO ] TASK [ovirt.hosted_engine_setup : Fail with error 
>> description] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": 
>> false, "msg": "The host has been set in non_operational status, 
>> deployment errors: code 505: Host fmov1n1.bcn.dtcorp.com installation 
>> failed. Failed to configure management network on the host., code 
>> 9000: Failed to verify Power Management configuration for Host 
>> fmov1n1.bcn.dtcorp.com., fix accordingly and re-deploy."}
>> 
>> Thanks so very much,
>> Charles
>> _______________________________________________
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org Privacy 
>> Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct: 
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives: 
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/LPUANZAL
>> Z7L5ZC26XE65AKFJCPUINU2N/ 
>> _______________________________________________
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org Privacy 
>> Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct: 
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives: 
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/NB3OJYAH
>> UG3YWTV3KHPGEYFVUM3ZZHIA/
> _______________________________________________
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
> https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/MRNRY7MDEFUF4T72UQTPB4YNGAXKO4IJ/
> 

_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/D6JR7VG4XAMY3GNURW6JVAMX3JNQPLQ2/

Reply via email to