I can't comment on the MPM or images but we had N310 streaming timeout issues that were recently fixed.
Upgrading from UHD 13 to 13.0.0.1 fixed all our (seemingly randomly occurring) streaming issues. On Thu, Aug 9, 2018 at 2:31 PM, Rob Kossler via USRP-users < usrp-users@lists.ettus.com> wrote: > When I first started using MPM 3.13, I was pleased to see the fast > initialization times compared to previous versions. Now, after spending > the better part of a couple of days troubleshooting issues, I am much less > thrilled with this version. > > The two attachments show the resulting spectrum from an external Tx->Rx RF > loopback experiment. The only difference between the two figures is the > change of MPM from 3.12 to 3.13. The baseband signal consists of 100 equal > amplitude tones equally spaced over 80% of the sampling freq (31.25e6, in > my case). Note that the 3.12 results are as expected. The 3.13 results > show energy over the full bandwidth and significant variations in tone > magnitude. I confirmed with a spectrum analyzer that the trouble was on > the Tx side rather than Rx. > > I also experienced issues with streaming timeouts occurring on the 2nd > time I issued a streaming command. However, with all of the variations I > have been going through while troubleshooting this issue, I cannot say for > certain that this secondary issue is related to the MPM version. > Presently, I am not seeing these streaming timeouts and I'm not sure of the > exact conditions that caused them. > > Rob > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
