Gunther Mayer wrote:
>Wan Tat Chee wrote:
>
>
>Tat Chee, earlier you wrote your tuner is TCL2002BM-1 and you usw
>LG_PAL_NEW_TAPC(tuner=37).
>(can you re-check if it reads "...MB" or really "...BM"?)
>Do you have the optional remote control (e.g. LVA001 microcontroller above saa713x)?
>
>My FV3K (w/FM w/IR Tuner:TCL2002MB-1F) has:
> saa7130/34: v4l2 driver version 0.1.5 loaded
> saa7134[0]: found at 00:11.0, rev: 1, irq: 5, latency: 32, mmio: 0xe4000000
> saa7134[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000
> saa7134 initial gpio_mode = 00000000
> saa7134: initial gpio_state = 00031000
>Here PHILIPS_PAL(tuner=5) works fine.
>
>So it seems these TCL2002MB tuners come in different flavours.
>
>Gerd, can you apply the GPIO printk patch ?
>I modified Tat Chee's patch to unconditionally print the info, we can make
>this silent (i.e. dprintk) later, when we have enough data !
>
>Robert, you reported you have a FV3000 and use tuner=37. Can you apply this patch,
>as I would be very interested in your GPIO (and wether you have FM and remote control
>chip).
>
I have had a look at the hardware of my card, the PCB is labelled LA158
Rev C. It has a TCL2002(S?)MB-1 tuner (I thought it said had S in there
when I looked, but reading your emails has confused me....). I have
remote control and the chip LVA001 (but I haven't actually got it
working yet - is it supported or is there tricks I have to do?).
I also have the HEF-4052BT chip. I do not have FM, and there is a
footprint on the board for the chips SBX1673 or SBX1637, but this is not
populated.
My modprobe suffers from the same problem as Tat Chee, Mar 24 21:33:52
phobos kernel: saa7134[0]: i2c eeprom read error #1 rc=-5
#modprobe tuner type=37
#modprobe saa7134
gives the following in dmesg:
i2c-core.o: driver i2c TV tuner driver registered.
saa7130/34: v4l2 driver version 0.1.4 loaded
PCI: Found IRQ 10 for device 02:03.0
saa7134[0]: found at 02:03.0, rev: 1, irq: 10, latency: 32, mmio: 0xdf001000
saa7134[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000
tuner: probing saa7134[0] i2c adapter [id=0x90000]
saa7134[0]/video: DCSDT: no signal
tuner: chip found @ 0xc2
i2c-core.o: client [LG PAL (newer TAPC series)] registered to adapter
[saa7134[0]](pos. 0).
i2c-core.o: adapter saa7134[0] registered as adapter 0.
saa7134[0]: i2c eeprom read error #1 rc=-5
saa7134[0]: registered device video0
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
saa7134[0]: registered device dsp4
saa7134[0]: registered device mixer2
saa7134[0]/video: DCSDT: no signal
I am a bit confused with the state of all the patches that we've thrown
around the list lately, what is the recommended combination?
Robert
>
>Marco, your data would be valuable, too.
>
>Regards, Gunther
>
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
