How can I check for a resistor pack? what does it look like? On Sun, Apr 26, 2009 at 2:35 PM, Charles Lenington <[email protected]> wrote: > > Christian Wacker wrote: >> Well... I would like to clear up a bunch of things. >> 1: the screen appears to get power, but it does not display an image. >> 2: the HDD does spin up, but won't read >> 3: The HDD was pulled from a perfectly fine install on a PowerMac 6100 >> with system 7.5.5 on it >> 4: The HDD is a 250mb 3.5" SCSI drive, with the same configuration to >> make it work in the PowerMac (SCSI ID 0) >> > > termination = did the old drive have resister packs? > Does the new drive? > Does the logic board? > > If the new drive doesn't have resisters or a jumper for termination an > in line terminator will be needed > . > > > >
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
