Thanks for the cleaning link. Doesn't look like I need it right now for this SE. Turns out the MicroMac INIT 2.2.1 related to the GemStart 16MHz Mercury from Total Systems is causing the problem (probably the init and the board itself). Turned off the INIT in the control panel, rebooted, and it formats floppies in both drives just fine.
An interesting little bit of conflict... Interferes with the format function but not the read/write function - hmmmmm. On 9/7/09 10:44 AM, "chrisA" <goo...@ccadams.org> wrote: > >>> Thanks - I'll probably end up trying to clean them. > > There's an article on cleaning floppy drives here: > > http://chrislawson.net/writing/macdaniel/2k0314.shtml > > And a site about the SE here: > > http://ccadams.org/se/ > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ -~----------~----~----~----~------~----~------~--~---