Hi Jeff, You might want to try some silicon adhesive. You'll have to figure out some way to support the glass until the adhesive cures (dries) (you might just be able to place it face down). The stuff is used to put glass aquariums together, so it should work in your application.
good luck Lee Quoting "Jeff Walther" <[email protected]>: > > My Umax Astra 600S is over ten years old, so I guess it's not > surprising... > > The glass has come loose and is falling into the well of the > machine. Under ordinary circumstances it is affixed to the inside of > the upper plastic case and just hangs there. I never realized that > until I had this problem. > > So, anyone know what a good replacement adhesive would be? It looks > like they originally stuck the glass in there with some kind of double- > sided tape. > > Thank you for any helpful or humorous suggestions, > > Jeff Walther > > P.S. No, I'm not interested in replacing it. Or rather, I already > have an Epson 3-in-1 on hand, but I want to fix this guy. > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ -~----------~----~----~----~------~----~------~--~---
