> I happened to be in the right place and the right time, and found an > original Mac 128k in great shape on Craigslist. Unfortunately, the > screen doesn't work. I can power it on, but it makes the mac bong, and > it sounds like a crt is turning on, but nothing comes on the screen. > There is a red light on on the inside.
Check connectors J1, J2 and J4 on the Analog board: it's best to re-solder them after removing the old solder. Especially the J1 connector between the Analog board and the Yoke is prone to failure. The red light you see is the floppy disk sensor: this is normal. I hope your Mac isn't broken during shipment. The bulb on the neck of the CRT is fragile and can break off or crack after a heavy bump. Take Care, Nico -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/
