Great Your results look very meaningful, Dave. We are still thinking about the problem of not uniform temperature across the reactor vessel just after the power pulse are applied, but it seems to me that you have solved them.
I hope to read the full report very soon. GG 2015-01-16 5:29 GMT+01:00 David Roberson <dlrober...@aol.com>: > I ran out of patience waiting for an input from Gigi and decided to > construct a simple numerical model of the calorimeter used with the Mizuno > test. After playing around with it for a while using the thermal values > derived by Gigi and his team, I have come to my first conclusion. It is a > bit early and I might find a glaring error somewhere with further analysis > but felt it was reasonable to offer an interim report. > > It is consistent with the model for the device to be generating an output > power of 100 watts. I have rounded the value off at this time until > further research can pin point it more accurately. > > Even if 4 watts of leakage is present due to the pump action, the > calorimeter appears to be fairly immune to that input provided the ambient > does not change more than 2 degrees during the test. > > Again, this is a first pass result and subject to revision. > > Dave >
