The externally low  Melting point‎: ‎165 °C (329 °F; 438 K) would seem to
me to be a dead give-a-way to the presence of 25% volume of Fe3(CO)12 by
weight.


Here again the safety profile is problematic

Triiron dodecarbonyl Safety Profile

Safety Information of Triiron dodecarbonyl (CAS NO.17685-52-8):
Hazard Codes: [image: Flammable]F,[image: Harmful]Xn,[image: Toxic]T
Risk Statements: 11-23/24/25-36/37/38-20/22
R11:Highly flammable.
R23/24/25:Toxic by inhalation, in contact with skin and if swallowed.
R20/22:Harmful by inhalation and if swallowed.
R36/37/38:Irritating to eyes, respiratory system and skin.
Safety Statements: 16-26-28-33-36/37/39-45-7/9-24
S16:Keep away from sources of ignition.
S26: In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
S28:After contact with skin, wash immediately with plenty of soap-suds.
S33:Take precautionary measures against static discharges.
S36/37/39:Wear suitable protective clothing, gloves and eye/face
protection.
S45:In case of accident or if you feel unwell, seek medical advice
immediately (show the label whenever possible.)
S24:Avoid contact with skin.
S7:Keep container tightly closed.
S9:Keep container in a well-ventilated place.
RIDADR: UN 3175 4.1/PG 2
WGK Germany: 3
F: 10-23
HazardClass: 6.1
PackingGroup: II



On Sun, May 12, 2019 at 4:40 PM <mix...@bigpond.com> wrote:

> In reply to  Axil Axil's message of Sun, 12 May 2019 03:39:08 -0400:
> Hi,
> [snip]
>
> 1) It may be Fe3(CO)12, a solid in the form of micro-crystals, rather than
> iron
> pentacarbonyl.
> 2) They didn't even know it was present, hence were hardly in a position
> to warn
> anyone.
>
> >Fe(CO)5 is toxic, which is of concern because of its volatility (vapour
> >pressure: 21 millimetres of mercury (2.8 kPa) at 20 °C). If inhaled
> ><https://en.wikipedia.org/wiki/Inhale>, iron pentacarbonyl may cause lung
> >irritation, toxic pneumonitis
> ><
> https://en.wikipedia.org/w/index.php?title=Toxic_pneumonitis&action=edit&redlink=1
> >,
> >or pulmonary edema <https://en.wikipedia.org/wiki/Pulmonary_edema>. Like
> >other metal carbonyls, Fe(CO)5 is flammable
> ><https://en.wikipedia.org/wiki/Flammable>. It is, however, considerably
> >less toxic than nickel tetracarbonyl
> ><https://en.wikipedia.org/wiki/Nickel_tetracarbonyl>.
> >
> >In regards to occupational exposures to iron pentacarbonyl, the National
> >Institute for Occupational Safety and Health
> ><
> https://en.wikipedia.org/wiki/National_Institute_for_Occupational_Safety_and_Health
> >
> >has
> >set a recommended exposure limit
> ><https://en.wikipedia.org/wiki/Recommended_exposure_limit> at 0.1 ppm
> >(0.23 mg/m3) over an eight-hour time-weighted average, and a short-term
> >exposure limit <https://en.wikipedia.org/wiki/Short-term_exposure_limit>
> at
> >0.2 ppm (0.45 mg/m3).[14]
> ><https://en.wikipedia.org/wiki/Iron_pentacarbonyl#cite_note-14>
> >
> >
> >If Fe(CO)5 were present in the final product, the smelter would be
> required
> >to warn the customer about its toxicity when handled, Remember, this  iron
> >pentacarbonyl is 25% of the product.
> >
> >On Sun, May 12, 2019 at 12:58 AM <mix...@bigpond.com> wrote:
> >
> >> In reply to  Axil Axil's message of Sat, 11 May 2019 23:40:53 -0400:
> >> Hi,
> >> [snip]
> >> >The  ferrosilicon chemistry
> >> >
> >> >https://www.sciencedirect.com/topics/chemistry/silicon-monoxide
> >> >
> >> >as per its reference as follows:
> >> >
> >> >Production of Ferroalloys
> >> ><
> https://www.sciencedirect.com/science/article/pii/B9780080969886000055>
> >> >
> >> >Rauf Hurman Eric, in Treatise on Process Metallurgy: Industrial
> Processes
> >> ><https://www.sciencedirect.com/book/9780080969886>, 2014
> >> >1.10.4.7.2 Fundamental Aspects
> >> >
> >> [snip]
> >> >
> >> >Sorry, but  the only chemically carbon bound compounds invoked with
> >> >ferrosilicon
> >> >chemistry is CO and SiC.
> >>
> >> Normally yes. However this may throw more light on the subject:-
> >>
> >> https://en.wikipedia.org/wiki/Metal_carbonyl
> >>
> >> &
> >>
> >> https://en.wikipedia.org/wiki/Triiron_dodecacarbonyl which is a solid.
> >>
> >> Regards,
> >>
> >>
> >> Robin van Spaandonk
> >>
> >> local asymmetry = temporary success
> >>
> >>
> Regards,
>
>
> Robin van Spaandonk
>
> local asymmetry = temporary success
>
>

Reply via email to