I never have a hidden agenda. My view of the Ni-CF research is clearly
stated in my book.
Jed,
Is this the view to which you refer, from Cold Fusion and the Future?
Steve
***************************
There is one more twist to this problem. Cold fusion can transmute the
cathode metal into
some other metal. This was definitively proved in experiments at Texas A&M,
Hokkaido
University, Mitsubishi Corporation and elsewhere. In other words, a cold
fusion reactor might
gradually convert the palladium into other metals, especially chromium and
iron. 60 It is not clear
whether this always happens. Perhaps we can find a way to prevent it. If we
cannot, the 171
metric tons of palladium we mine every year will rapidly be converted into
cheap, useless
chromium and iron, before we can generate much energy from it. The scenario
described above,
with the 24-hour baseline generators, would only work if we can recycle the
palladium and use
the same cathode metal again and again for decades. If the palladium turns
into iron in a few
years, cold fusion will never be a practical source of energy.
Fortunately, there are good indications that cold fusion works well with
abundant metals
including nickel and titanium, although experiments with these materials
have not yet been
widely replicated, so I have lingering doubts about them. Cold fusion
probably transmutes these
metals too, but that may be an advantage. Suppose the process can be
"tuned" to output any
element we choose. After a cold fusion automobile engine has run for a few
years, the cells
inside it will be swapped out, and the metal recycled. A sizeable fraction
of the nickel or titanium
may be turned into gold or some other valuable element.
***************************