Possibly he will not create overpressure in the 1MW system. We dont know. Only Rossi knows.
So if you have the guts and go into this big 1 MW box under full operation then your health and live is subject to god's grace and Rossis skills if something unexpected happens.
I would not go inside after having seen the video....
Simon Knight
September 16th, 2011 at 9:27 AM
Dear Andrea Rossi,
Before the 1MW plant is taken into operation would it be necessary to have the system certified according to the ASME Pressure Vessel Code?
Kind regards, Simon
Dear Simon Knight:
We are studying the issue.
Warm Regards,
A.R.
[ Says several times that Bologna and Uppsala do NOT have eCats, and that the Bologna contract has NOT yet started.
]
Alessandro Casali
September 16th, 2011 at 8:09 AM
the new test planned with Upsalla University is a great news, do you think it will be done by the end of September?
I think it will be done in October.
Warm Regards,
A.R.
[ and to an earlier question : ]
8- I ddid NOT say that we are already working, I said the first steps have been made: signed the contract and some other thing. The proper R&D with the University of Bologna did not start yet.
[ and ]
Andrea Rossi
September 16th, 2011 at 3:07 AM
Dear Pietro F:
Yes we have very big financial problems, because I have spent on this all the money I had, and sold all I had, also because the Customer we counted on could not maintain his financial engagements and this has left the ship in the middle of the ocean without oil for the engine. But we are going through, the 1 MW plant will be ready for the end of October for the test anyway, we are close.
Yes, we will organize e new very important test in Uppsala, and this time we will make the calorimetric measurements in a new way, suggested by the Professors: the steam circuit will be a closed circuit with a condenser and will exchange heat with a flow of liquid water: basically, we will have a primary circuit of the E-Cat and a secondary circuit through a radiator, and the energy will be calculated not from the delta T of the input/output of the reactor, but from the delta T of the secondary, which will exchange the heat by means of a heat exchanger. Of course the calculation of the energy produced will be in our disadvantage, because the heat exchange system has not a 100% efficiency, but I can accept it, because our energy gain is very high. The operation will be made also with self sustaining mode. We are already making this test in our factory, and the results of the energy gain are very close to the measurements we made in past. I am very satisfied.
Warm Regards,
A.R.
