I have just emailed Rossi with my interest in purchasing a 100 kW E-Cat
plant. I do thank Vortex members (on the forum and privately) for
providing the behind the scenes insight into the history of LENR that
helped to make this decision happen. My bags are ready to be packed,
funds locked down and I'm ready to fly to Bologna to see and test a
E-Cat reactor. What I didn't know or were a bit rusty about in measuring
a E-Cat has been provided by the excellent Vortex forum.
My intention is to pay the funds into a Escrow account, request a test
of a single E-Cat and if that is found to be OK, to proceed to pre
delivery testing the 100 kW plant. Failure of either test to meet a min
COP 6 result would trigger the return of all my Escrowed funds.
I would appreciate suggestions as to the necessary equipment (manuf and
model) you would suggest I would need to make the initial single E-Cat
test measurements. I do have many thermocouples and DVMs with temp
ranges but no flow meters. Does anybody know the manuf and model of the
heat exchanger used in the 6 Oct demo as I plan to use that setup to do
the delta T measurements. I do plan on taking a 16 channel data logger
and digital oscilloscope (both battery powered) to check the input
energy in ALL the wires going into the E-Cat.
From what I have read here, the 2 temp probes should be inserted
through the wall of the water hose feeding the heat exchanges enough so
they are approx central to the water flow, while not touching the inside
wall of the water hose and likewise for the outlet water hose. Is a 45
deg insertion angle acceptable?
AG
