If CB signal controls the eCat (which I doubt) then the problems of overheating, positive feedback will be solved easily. This is not the case. Otherwise a CB radio amateur could solve the eCat control issue if it was so easy and COP infinite.
If EM enhances the reaction rate, then it should at a low frequency regarding the material used by Rossi to make its eCat. _____ From: David L Babcock [mailto:ol...@rochester.rr.com] Sent: jeudi 30 mai 2013 02:57 To: vortex-l@eskimo.com Subject: Re: EXTERNAL: Re: [Vo]:Speculation about hotCat CB radio RF generation If plenty of power is available, and stringent RF interference specs don't need to be met, the simple wires will work fine. But I must admit an engineer would always use a coax for such a task. But maybe not an engineer who is trying to obsfucate On 5/29/2013 4:47 PM, Arnaud Kodeck wrote: To bring CB signal, the wires have to be shielded. The impedance must match in all system. Attenuation of CB signal must be kept as low as possible . The simple wires from the black box to the eCat doesn't meet those requirements. It's common sense for an EE. _____ From: Axil Axil [mailto:janap...@gmail.com] Sent: mercredi 29 mai 2013 22:43 To: vortex-l Subject: Re: EXTERNAL: Re: [Vo]:Speculation about hotCat Why else would Rossi say that the output of his control box was a trade secret? A DC feed of a internal heater is not a trade secret. On Wed, May 29, 2013 at 4:34 PM, Arnaud Kodeck <arnaud.kod...@lakoco.be> wrote: Axil, I doubt that the actual design of the eCat is able to bring CB range signal from electrical heating system. Or where else ? _____ From: Axil Axil [mailto:janap...@gmail.com] Sent: mercredi 29 mai 2013 22:08 To: vortex-l Subject: Re: EXTERNAL: Re: [Vo]:Speculation about hotCat EMF simulation in the CB range will form nanoparticles (aka clusters). Potassium is the best candidate for the formation of dynamic NAE through nanoparticle formation when stimulated by EMF. On Wed, May 29, 2013 at 4:02 PM, Arnaud Kodeck <arnaud.kod...@lakoco.be> wrote: Ed, I think you forget to add the EM stimulation controlled by the black box between wall socket and the eCat. Arnaud
