No I have not had any time to fool with it these past few days... but from what I can tell the sym53c8xx module is loaded before the needed cpqarray module and thats what is causing the failure. I have tried unloading the modules and reloading cpqarray but don't seem to have any luck. My guess is the SCSI controller needs to be reset or what have you. I have not had any luck disabling the sym53c8xx module from the boot loader so I think the next step is to build a live CD from scratch. I've never built a live CD so its going to be a learning thing for me for sure. Maybe you will have better luck... Let me know if you find anything :)
On Nov 26, 2007 11:46 PM, Cory B. Goleman <[EMAIL PROTECTED]> wrote: > > > > > I'm having the same problem, trying to install Vyatta 3.0 to a DL 360 G1 > with a RAID 1 configuration, have you made any progress on this? > > > > Regards, > > Cory- > > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users