Well I followed your directions step by step and didn't have any problems until attempting to boot the CD. Check out the attached screen shot.. What do you recommend checking out?
On Nov 27, 2007 5:39 PM, Max <[EMAIL PROTECTED]> wrote: > That was more less what i was going to do. You saved me a good deal of > work trying to figure out the right way to recreate the ISO. If this > works out, I owe you a pint! :D > > > On Nov 27, 2007 5:07 PM, Robert Bays <[EMAIL PROTECTED]> wrote: > > Max, > > > > To avoid building from scratch you could just edit the initrd. Try > > something like the following... > > > > 1. mount the iso to a loop device and copy the contents to a tmpdir > > mount -o loop ./livecd-vc3.iso ./dir > > cp -R ./dir/* ./tmpiso/ > > umount ./dir > > 2. extract the initrd.img > > mkdir tmpinitrd > > cd tmpinitrd > > gzip -cd ../tmpiso/boot/initrd.img.img | cpio -imd --quiet > > 3. remove the module > > rm ./lib/modules/2.6.20/kernel/drivers/scsi/sym53c8xx_2/sym53c8xx.ko > > 4. zip up the initrd and copy it into the temporary iso dir > > chmod -R 755 ../tmpiso > > rm ../tmpiso/boot/initrd.img > > find . | cpio --quiet -c -o | gzip -9 -n >> ../tmpiso/boot/initrd.img > > 5. create the iso > > cd ../tmpiso > > mkisofs -J -r -o ../livecd.iso -b boot/isolinux/isolinux.bin -c > > boot/isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table > > /home/rbays/tmpiso/ > > > > Should work... > > > > Cheers, > > Robert. > > > > > > Max wrote: > > > No I have not had any time to fool with it these past few days... > > > but from what I can tell the sym53c8xx module is loaded before the needed > > > cpqarray module and thats what is causing the failure. I have tried > > > unloading the modules and reloading cpqarray but don't seem to have > > > any luck. My guess is the SCSI controller needs to be reset or what > > > have you. > > > I have not had any luck disabling the sym53c8xx module from the boot > > > loader so I think the next step is to build a live CD from scratch. > > > I've never built a live CD so its going to be a learning thing for me > > > for sure. Maybe you will have better luck... Let me know if you find > > > anything :) > > > > > > On Nov 26, 2007 11:46 PM, Cory B. Goleman <[EMAIL PROTECTED]> wrote: > > >> > > >> > > >> > > >> I'm having the same problem, trying to install Vyatta 3.0 to a DL 360 G1 > > >> with a RAID 1 configuration, have you made any progress on this? > > >> > > >> > > >> > > >> Regards > > >> > > >> Cory- > > >> > > >> > > > _______________________________________________ > > > Vyatta-users mailing list > > > Vyatta-users@mailman.vyatta.com > > > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > >
<<attachment: Picture 1.png>>
_______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
