Well nevermind I figured it out after looking at the install-system script.
I provided ida/c0d0 instead of /dev/ida/c0d0 Wish me luck :) On Jan 13, 2008 1:57 PM, Max <[EMAIL PROTECTED]> wrote: > Ah! Success, it worked! > The drives are getting detected as expected on boot and I can fdisk > them and such. > The problem is now the install! When I am promted ton what drive to > install the software on, it does not contain any thing... > > I found the following drives on your system: > > Install the image on? []: > > I tried to manualy set the drive /dev/ida/c0d0 at the prompt, but it > looks like it just hangs. > > Any ideas? > > > On Jan 13, 2008 1:52 PM, Max <[EMAIL PROTECTED]> wrote: > > Nope, still no dice :( > > It boots like it is supose to this time though. > > Any other recomendations? > > > > > > On Nov 29, 2007 9:15 PM, Robert Bays <[EMAIL PROTECTED]> wrote: > > > It looks like it can't find or open the initramfs. In the initrd > > > creation step try this instead. > > > > > > find . | cpio --quiet --dereference -o -H newc | gzip -9 > > > > ../tmpiso/boot/initrd.img > > > > > > Cheers, > > > Robert. > > > > > > > > > Max wrote: > > > > Well I followed your directions step by step and didn't have any > > > > problems until attempting to boot the CD. Check out the attached > > > > screen shot.. > > > > What do you recommend checking out? > > > > > > > > > > > > > > > > On Nov 27, 2007 5:39 PM, Max <[EMAIL PROTECTED]> wrote: > > > >> That was more less what i was going to do. You saved me a good deal of > > > >> work trying to figure out the right way to recreate the ISO. If this > > > >> works out, I owe you a pint! :D > > > >> > > > >> > > > >> On Nov 27, 2007 5:07 PM, Robert Bays <[EMAIL PROTECTED]> wrote: > > > >>> Max, > > > >>> > > > >>> To avoid building from scratch you could just edit the initrd. Try > > > >>> something like the following... > > > >>> > > > >>> 1. mount the iso to a loop device and copy the contents to a tmpdir > > > >>> mount -o loop ./livecd-vc3.iso ./dir > > > >>> cp -R ./dir/* ./tmpiso/ > > > >>> umount ./dir > > > >>> 2. extract the initrd.img > > > >>> mkdir tmpinitrd > > > >>> cd tmpinitrd > > > >>> gzip -cd ../tmpiso/boot/initrd.img.img | cpio -imd --quiet > > > >>> 3. remove the module > > > >>> rm ./lib/modules/2.6.20/kernel/drivers/scsi/sym53c8xx_2/sym53c8xx.ko > > > >>> 4. zip up the initrd and copy it into the temporary iso dir > > > >>> chmod -R 755 ../tmpiso > > > >>> rm ../tmpiso/boot/initrd.img > > > >>> find . | cpio --quiet -c -o | gzip -9 -n >> ../tmpiso/boot/initrd.img > > > >>> 5. create the iso > > > >>> cd ../tmpiso > > > >>> mkisofs -J -r -o ../livecd.iso -b boot/isolinux/isolinux.bin -c > > > >>> boot/isolinux/boot.cat -no-emul-boot -boot-load-size 4 > > > >>> -boot-info-table > > > >>> /home/rbays/tmpiso/ > > > >>> > > > >>> Should work... > > > >>> > > > >>> Cheers, > > > >>> Robert. > > > >>> > > > >>> > > > >>> Max wrote: > > > >>>> No I have not had any time to fool with it these past few days... > > > >>>> but from what I can tell the sym53c8xx module is loaded before the > > > >>>> needed > > > >>>> cpqarray module and thats what is causing the failure. I have tried > > > >>>> unloading the modules and reloading cpqarray but don't seem to have > > > >>>> any luck. My guess is the SCSI controller needs to be reset or what > > > >>>> have you. > > > >>>> I have not had any luck disabling the sym53c8xx module from the boot > > > >>>> loader so I think the next step is to build a live CD from scratch. > > > >>>> I've never built a live CD so its going to be a learning thing for me > > > >>>> for sure. Maybe you will have better luck... Let me know if you find > > > >>>> anything :) > > > >>>> > > > >>>> On Nov 26, 2007 11:46 PM, Cory B. Goleman <[EMAIL PROTECTED]> wrote: > > > >>>>> > > > >>>>> > > > >>>>> I'm having the same problem, trying to install Vyatta 3.0 to a DL > > > >>>>> 360 G1 > > > >>>>> with a RAID 1 configuration, have you made any progress on this? > > > >>>>> > > > >>>>> > > > >>>>> > > > >>>>> Regards > > > >>>>> > > > >>>>> Cory- > > > >>>>> > > > >>>>> > > > >>>> _______________________________________________ > > > >>>> Vyatta-users mailing list > > > >>>> Vyatta-users@mailman.vyatta.com > > > >>>> http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > > >> > > > >> ------------------------------------------------------------------------ > > > > > > >> > > > _______________________________________________ > > > Vyatta-users mailing list > > > Vyatta-users@mailman.vyatta.com > > > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > > > > > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users