That was more less what i was going to do. You saved me a good deal of work trying to figure out the right way to recreate the ISO. If this works out, I owe you a pint! :D
On Nov 27, 2007 5:07 PM, Robert Bays <[EMAIL PROTECTED]> wrote: > Max, > > To avoid building from scratch you could just edit the initrd. Try > something like the following... > > 1. mount the iso to a loop device and copy the contents to a tmpdir > mount -o loop ./livecd-vc3.iso ./dir > cp -R ./dir/* ./tmpiso/ > umount ./dir > 2. extract the initrd.img > mkdir tmpinitrd > cd tmpinitrd > gzip -cd ../tmpiso/boot/initrd.img.img | cpio -imd --quiet > 3. remove the module > rm ./lib/modules/2.6.20/kernel/drivers/scsi/sym53c8xx_2/sym53c8xx.ko > 4. zip up the initrd and copy it into the temporary iso dir > chmod -R 755 ../tmpiso > rm ../tmpiso/boot/initrd.img > find . | cpio --quiet -c -o | gzip -9 -n >> ../tmpiso/boot/initrd.img > 5. create the iso > cd ../tmpiso > mkisofs -J -r -o ../livecd.iso -b boot/isolinux/isolinux.bin -c > boot/isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table > /home/rbays/tmpiso/ > > Should work... > > Cheers, > Robert. > > > Max wrote: > > No I have not had any time to fool with it these past few days... > > but from what I can tell the sym53c8xx module is loaded before the needed > > cpqarray module and thats what is causing the failure. I have tried > > unloading the modules and reloading cpqarray but don't seem to have > > any luck. My guess is the SCSI controller needs to be reset or what > > have you. > > I have not had any luck disabling the sym53c8xx module from the boot > > loader so I think the next step is to build a live CD from scratch. > > I've never built a live CD so its going to be a learning thing for me > > for sure. Maybe you will have better luck... Let me know if you find > > anything :) > > > > On Nov 26, 2007 11:46 PM, Cory B. Goleman <[EMAIL PROTECTED]> wrote: > >> > >> > >> > >> I'm having the same problem, trying to install Vyatta 3.0 to a DL 360 G1 > >> with a RAID 1 configuration, have you made any progress on this? > >> > >> > >> > >> Regards > >> > >> Cory- > >> > >> > > _______________________________________________ > > Vyatta-users mailing list > > Vyatta-users@mailman.vyatta.com > > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
