The driver should emit 'rain' in the LOOP packet. It looks like yours is
just emitting 'rain_total'. The SDR driver should be calculating 'rain'
from 'rain_total'. See the discussion on genLoopPackets
<http://www.weewx.com/docs/customizing.htm#genLoopPackets> in the *Customizing
Guide*.
Not sure what the difference would be between master and development.
1. Are you using the same configuration file (weewx.conf) for both?
2. Which version of the skin is development using? The new version?
3. Set debug=1, then rerun, then check the log. It may be trying to tell
you something.
-tk
On Tue, Nov 2, 2021 at 7:52 PM Andy <rocklin...@gmail.com> wrote:
> Yes, that fixed the battery indicator. Running the master branch gets a
> rain plot, with development no rain plot. There is no rain in the new
> database since it has not rained today.
>
> The rtl_433 is a bit of a moving target, but looks to be working. I will
> create some rain tomorrow.
>
> out:['{"time" : "2021-11-03 02:33:04", "model" : "Acurite-5n1",
> "message_type" : 49, "id" : 2662, "channel" : "A", "sequence_num" : 0,
> "battery_ok" : 1, "wind_avg_km_h" : 0.000, "wind_dir_deg" : 180.000,
> "*rain_in"
> : 24.820*, "mic" : "CHECKSUM"}\n', '{"time" : "2021-11-03 02:33:04",
> "model" : "Acurite-5n1", "message_type" : 49, "id" : 2662, "channel" : "A",
> "sequence_num" : 1, "battery_ok" : 1, "wind_avg_km_h" : 0.000,
> "wind_dir_deg" : 180.000, "rain_in" : 24.820, "mic" : "CHECKSUM"}\n',
>
> {'dateTime': 1635906784, 'usUnits': 1, 'protocol.0A66.Acurite5n1PacketV2':
> None, 'model.0A66.Acurite5n1PacketV2': 'Acurite-5n1',
> 'channel.0A66.Acurite5n1PacketV2': 'A',
> 'sequence_num.0A66.Acurite5n1PacketV2': 0,
> 'battery.0A66.Acurite5n1PacketV2': 0, 'mod.0A66.Acurite5n1PacketV2': None,
> 'freq.0A66.Acurite5n1PacketV2': None, 'rssi.0A66.Acurite5n1PacketV2': None,
> 'snr.0A66.Acurite5n1PacketV2': None, 'noise.0A66.Acurite5n1PacketV2': None,
> 'msg_type.0A66.Acurite5n1PacketV2': 49,
> 'wind_speed.0A66.Acurite5n1PacketV2': 0.0,
> 'wind_dir.0A66.Acurite5n1PacketV2': 180.0,
> '*rain_total.0A66.Acurite5n1PacketV2':
> 24.82*}
>
> Nov 2 19:46:22 debian weewx[14328] DEBUG user.sdr: packet={'windDir':
> 202.5, 'windSpeed': 0.0,* 'rain_total': 24.82,* 'windBatteryStatus': 0,
> 'dateTime': 1635907576, 'usUnits': 1}
>
> rain_total = rain_total.0A66.Acurite5n1PacketV2
>
> On Tuesday, November 2, 2021 at 3:19:57 PM UTC-7 Tom Keffer wrote:
>
>> Not sure about this 'rain' problem, but there have been so many changes
>> in this area since beta-3, that I'm hesitant to draw much of a conclusion.
>>
>> If you're comfortable with git, you could clone the repository and run
>> directly from the development branch. If not, no worries. I'm planning on
>> sending b-6 out real soon now.
>>
>> -tk
>>
>> On Tue, Nov 2, 2021 at 3:04 PM Andy <rockl...@gmail.com> wrote:
>>
>>> No rain plot
>>>
>>> [image: noRainPlot.png]
>>> On Tuesday, November 2, 2021 at 3:01:13 PM UTC-7 Andy wrote:
>>>
>>>>
>>>> Battery status displayed as numbers
>>>>
>>>> Clean setup.py install of WeeWX version 4.6.0b3
>>>> Battery Status
>>>> Outside Temperature Battery 1.000000
>>>> Inside Temperature Battery 0.000000
>>>> Wind Battery 0.000000
>>>>
>>>> On Saturday, October 16, 2021 at 10:12:03 AM UTC-7 vince...@gmail.com
>>>> wrote:
>>>>
>>>>> I think the missing wind direction readings is weewx not reporting
>>>>> that item when the wind speed is zero.
>>>>>
>>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-development" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-developm...@googlegroups.com.
>>>
>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-development/ad6b3976-2560-4c5e-b0f5-8a95f8717c87n%40googlegroups.com
>>> <https://groups.google.com/d/msgid/weewx-development/ad6b3976-2560-4c5e-b0f5-8a95f8717c87n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-development" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-development+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-development/9ce16043-d06f-4215-ad5f-5b43ce9fc671n%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-development/9ce16043-d06f-4215-ad5f-5b43ce9fc671n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"weewx-development" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-development+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-development/CAPq0zEB9F5FUyhoG6SycRm5%3Du5i7noWDYu40JVmzpR-JX-s0QA%40mail.gmail.com.
