Thanks Andrew (and others..) Yes, is now working as I wanted using this info - Good stuff! May now delve a little deeper into other options etc - Gradually understanding the process a little better. Hope it doesn't suck me in too far! :-)
Thanks, all. On Sunday, 29 January 2017 21:36:59 UTC+10, Andrew Milner wrote: > > It IS based on the archive period. If you want to update every 10 minutes > then you need to: > a) stop weewx > b) edit weewx.conf and change archive_interval (in SECONDS) in the > stdArchive section > c) either use wee_device --set_interval to change the archive interval in > the wh1080 to match or set record_generation = software > d) restart weewx - preferably with debug=1 and check the log from startup > to make sure the new interval is being used > > On Sunday, 29 January 2017 12:49:42 UTC+2, John Bennett wrote: > >> Sorry for being rather thick, but have been running weewx for several >> months, and after lots of reading/searching/experimenting etc, can't for >> the life of me figure out how to change the ftp upload period... >> Running weewx 3.6.2-1 on a raspberry pi, very basic install, using a >> WH1080 weatherstation. Uploading to FTP and Weather Underground. >> Has been uploading every 30 mins, on the half hour since install. Would >> really like to upload every 10/15 mins if possible. >> Apparently based on the archive period - how do I find out what that is, >> and wether it is hardware/software? >> Feel like the answer is starng me in the face, but can't see it! >> Thanks. >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.