Hello Damjan, I have the same station, it's a Fine Offset HP1000. Mine is from Froggit. I had the same problem. You must take care for upper and lower cases with your station name and password. Wunderground need some time to register your station (24 hours or so). After that my station didn't also work. So I did several resets by powercycling and suddenly it worke. But it also interrupts the transfer of data. You can see a WiFi-Symbol beside the signal-strength symbol if there is a transfer successful.
But there are some guys in the net where the problem of uploading still exists longer. http://fineoffset.com/hp1000.htm My dealer is now checking the station because it didn't also connect to EasyWeatherIP. Is Port 80 open? NOT REALLAY PLUG AND PLAY Hope you will find the issue. Good luck Joachim Am Sonntag, 10. September 2017 14:24:13 UTC+2 schrieb Damjan Hajsek: > > Hi, I hope you guys here can help me with my weather station and weewx. > > Today I have installed weewx and now I am trying to tak data from Aercus > WeatherRanger. > I have setup server.ini to send data to weewx. > weewx have been installed with rpm file on my Centos 7 server. > After installing weewx it shows page and some data, but that data didn't > update since installation, all is the same. > Also after seting up server.ini on my weather station for sending data to > my server nothing changes. > I also setup http://help.wunderground.com and there is no data from my > weather station. > So I checked and station is connected to wifi and I can ping it from my PC. > > So what I did wrong that weather station not sending data to my weewx and > why weewx not update. > > When install weewx I have troubles to install drivers, so I first check 3) > FineOffsetUSB and nothing happend so than I have installed another driver > https://github.com/matthewwall/weewx-interceptor > And still no changes. > > > Installed drivers include: > 0) Interceptor (user.interceptor) > 1) AcuRite (weewx.drivers.acurite) > 2) CC3000 (weewx.drivers.cc3000) > 3) FineOffsetUSB (weewx.drivers.fousb) > 4) Simulator (weewx.drivers.simulator) > 5) TE923 (weewx.drivers.te923) > 6) Ultimeter (weewx.drivers.ultimeter) > 7) Vantage (weewx.drivers.vantage) > 8) WMR100 (weewx.drivers.wmr100) > 9) WMR200 (weewx.drivers.wmr200) > 10) WMR300 (weewx.drivers.wmr300) > 11) WMR9x8 (weewx.drivers.wmr9x8) > 12) WS1 (weewx.drivers.ws1) > 13) WS23xx (weewx.drivers.ws23xx) > 14) WS28xx (weewx.drivers.ws28xx) > > What I did wrong? > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
