Hmm, not too much to pinpoint the culprit there. Could it be a power supply issue, of course, official power supply or not it could still be the culprit. You could check the output with a meter but will unlikely show any transient fluctuations that could be causing a problem. Worth doing if you can though. Swapping out the power supply or RPi itself is probably not feasible unless you happen to have a spare.
Could be an issue with the logger, can help by reseating it/making sure it is inserted securely. Could be power to your console (you have an envoy if I remember correctly), what is your mains like? Do you have an UPS from which you can power both RPi and station. What is plugged into the RPi, powered hub, keyboard? monitor? Might sound odd but can you run without the hub and plug the station into the RPi direct. Are there any long cable runs, obvious one to look at is 5V to the RPi but if that is the official power supply probably not much to be done there. Sorry these are all a bit woolly but these sorts of issues can be difficult to nail down. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
