Try to communicate directly with the Envoy, without going through WeeWX. For how to do this, see the section *Establishing connectivity <http://weewx.com/docs/usersguide.htm#Establishing_connectivity>* in the User's Guide. If you are unable to do that, then this is definitely a hardware problem.
-tk On Mon, Jan 28, 2019 at 2:41 PM dunbrokin <dunbro...@gmail.com> wrote: > Thanks, but no I don't ....I use VNC. > > On Tue, Jan 29, 2019 at 11:35 AM <kutze...@gmail.com> wrote: > >> Just a quick question. Do you have a monitor (like the Pi 7 in touch >> screen) attached that is running off the same power supply as the Pi? I had >> a setup like that which used a splitter to power both the monitor and Pi >> from one power pack. My setup kept complaining of undervolting until I >> removed the splitter and plugged the monitor and pi each into their own >> power supply. >> >> phil >> >> On Monday, January 28, 2019 at 3:41:15 PM UTC-5, monmul wrote: >>> >>> I have replaced the power unit, taken it off the power strip an plugged >>> both it and the Vanatage into the mains. I have replaced the powered hub >>> (official RPi one...with another official RPi one) ...and here is what I am >>> getting.......very dispirited! I have another Davis Weather Envoy which I >>> will soon substitute for the one I am currently using.....but nothing seems >>> to make a difference and the Envoy just will not wake up! >>> >>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog >>> Jan 29 09:14:05 raspberrypi udisksd[766]: Mounted /dev/sda1 at >>> /media/pi/e78ab10a-51d2-40f0-aa6d-5f2d2b0f27b7 on behalf of uid 1000 >>> Jan 29 09:14:05 raspberrypi vncserver-x11[453,root]: SPrintConnMgr: >>> Failed to add printer: server-error-service-unavailable >>> Jan 29 09:14:07 raspberrypi dhcpcd[338]: wlan0: no IPv6 Routers available >>> Jan 29 09:14:10 raspberrypi kernel: [ 22.871754] Voltage normalised >>> (0x00000000) >>> Jan 29 09:14:12 raspberrypi weewx[506]: vantage: Unable to wake up >>> console >>> Jan 29 09:14:12 raspberrypi weewx[506]: import of driver failed: Unable >>> to wake up Vantage console (<class 'weewx.WakeupError'>) >>> Jan 29 09:14:12 raspberrypi weewx[506]: engine: Unable to load driver: >>> Unable to wake up Vantage console >>> Jan 29 09:14:12 raspberrypi weewx[506]: **** Exiting... >>> Jan 29 09:14:27 raspberrypi kernel: [ 39.511958] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:14:31 raspberrypi kernel: [ 43.671921] Voltage normalised >>> (0x00000000) >>> Jan 29 09:15:00 raspberrypi ntpd[467]: Soliciting pool server >>> 103.239.8.22 >>> Jan 29 09:15:00 raspberrypi ntpd[467]: Soliciting pool server >>> 202.46.185.18 >>> Jan 29 09:15:01 raspberrypi ntpd[467]: Soliciting pool server >>> 203.99.128.48 >>> Jan 29 09:15:01 raspberrypi ntpd[467]: Soliciting pool server >>> 103.106.66.123 >>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>> 103.242.68.69 >>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>> 103.106.65.219 >>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>> 103.242.70.5 >>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>> 122.252.188.99 >>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server >>> 130.217.226.51 >>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server >>> 103.242.68.68 >>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server >>> 203.99.128.34 >>> Jan 29 09:15:04 raspberrypi ntpd[467]: Soliciting pool server >>> 202.46.177.18 >>> Jan 29 09:15:04 raspberrypi ntpd[467]: Soliciting pool server >>> 2407:f100:0:4::3 >>> Jan 29 09:15:06 raspberrypi ntpd[467]: Soliciting pool server >>> 202.46.178.18 >>> Jan 29 09:17:41 raspberrypi systemd[584]: Time has been changed >>> Jan 29 09:17:41 raspberrypi systemd[1]: Time has been changed >>> Jan 29 09:17:41 raspberrypi systemd[1]: apt-daily.timer: Adding 9h 28min >>> 39.184756s random time. >>> Jan 29 09:17:41 raspberrypi systemd[1]: apt-daily-upgrade.timer: Adding >>> 27min 17.961005s random time. >>> Jan 29 09:18:28 raspberrypi kernel: [ 126.872661] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:18:34 raspberrypi kernel: [ 133.112736] Voltage normalised >>> (0x00000000) >>> Jan 29 09:18:34 raspberrypi CRON[1276]: (root) CMD ( cd / && run-parts >>> --report /etc/cron.hourly) >>> Jan 29 09:22:29 raspberrypi kernel: [ 368.155297] >>> rpi_firmware_get_throttled: 2 callbacks suppressed >>> Jan 29 09:22:29 raspberrypi kernel: [ 368.155304] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:22:33 raspberrypi kernel: [ 372.315315] >>> rpi_firmware_get_throttled: 2 callbacks suppressed >>> Jan 29 09:22:33 raspberrypi kernel: [ 372.315322] Voltage normalised >>> (0x00000000) >>> Jan 29 09:24:27 raspberrypi kernel: [ 486.716533] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:24:34 raspberrypi kernel: [ 492.956607] Voltage normalised >>> (0x00000000) >>> Jan 29 09:26:28 raspberrypi kernel: [ 607.357755] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:26:32 raspberrypi kernel: [ 611.517793] Voltage normalised >>> (0x00000000) >>> Jan 29 09:26:45 raspberrypi ntpd[467]: 203.99.128.34 local addr 10.1.1.7 >>> -> <null> >>> Jan 29 09:30:13 raspberrypi ntpd[467]: 103.239.8.22 local addr 10.1.1.7 >>> -> <null> >>> Jan 29 09:30:45 raspberrypi ntpd[467]: 203.99.128.48 local addr 10.1.1.7 >>> -> <null> >>> Jan 29 09:31:18 raspberrypi ntpd[467]: 122.252.188.99 local addr >>> 10.1.1.7 -> <null> >>> Jan 29 09:31:23 raspberrypi systemd[1]: Starting Cleanup of Temporary >>> Directories... >>> Jan 29 09:31:23 raspberrypi systemd[1]: Started Cleanup of Temporary >>> Directories. >>> Jan 29 09:32:22 raspberrypi ntpd[467]: 130.217.226.51 local addr >>> 10.1.1.7 -> <null> >>> Jan 29 09:32:59 raspberrypi kernel: [ 998.401865] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:33:03 raspberrypi kernel: [ 1002.561870] Voltage normalised >>> (0x00000000) >>> Jan 29 09:33:05 raspberrypi kernel: [ 1004.643095] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:33:12 raspberrypi kernel: [ 1010.882010] Voltage normalised >>> (0x00000000) >>> Jan 29 09:33:22 raspberrypi kernel: [ 1021.282184] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:33:34 raspberrypi kernel: [ 1033.762240] Voltage normalised >>> (0x00000000) >>> Jan 29 09:34:42 raspberrypi ntpd[467]: 103.106.66.123 local addr >>> 10.1.1.7 -> <null> >>> Jan 29 09:35:16 raspberrypi ntpd[467]: 103.106.65.219 local addr >>> 10.1.1.7 -> <null> >>> Jan 29 09:38:17 raspberrypi kernel: [ 1316.645409] >>> rpi_firmware_get_throttled: 12 callbacks suppressed >>> Jan 29 09:38:17 raspberrypi kernel: [ 1316.645416] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:38:26 raspberrypi kernel: [ 1324.965452] >>> rpi_firmware_get_throttled: 12 callbacks suppressed >>> Jan 29 09:38:26 raspberrypi kernel: [ 1324.965457] Voltage normalised >>> (0x00000000) >>> Jan 29 09:38:28 raspberrypi kernel: [ 1327.045547] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:38:32 raspberrypi kernel: [ 1331.205544] Voltage normalised >>> (0x00000000) >>> Jan 29 09:38:36 raspberrypi kernel: [ 1335.365722] Under-voltage >>> detected! (0x00050005) >>> Jan 29 09:38:55 raspberrypi kernel: [ 1354.085857] Voltage normalised >>> (0x00000000) >>> >>> >>> On Tuesday, 29 January 2019 08:51:01 UTC+13, vince wrote: >>>> >>>> On Monday, January 28, 2019 at 11:34:08 AM UTC-8, monmul wrote: >>>>> >>>>> I do have a spare official power supply, so I will swap out that and >>>>> test. ... I have a Pi3B+ on the way >>>>> >>>> >>>> Reminder, the pi3b+ need 'more' power and runs a little hotter than the >>>> others, so definitely be certain you have a quality power supply. >>>> >>>> I have had great luck with >>>> https://www.amazon.com/CanaKit-Raspberry-Power-Supply-Listed/dp/B07BC6WH7V >>>> just as one example. Also like the nice on/off switch dongle that came >>>> with it. >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
