For updating sudo apt-get update sudo apt-get upgrade
Your pressure comes from the console not the outdoor sensors. On Sunday, December 15, 2019 at 11:36:12 AM UTC-5, Gert Andersen wrote: > Hi > I think I have come a little bit closer. I can see the different sensors > and I can see their mapping. > > There are some things I can't figure out though. My reports do not show > the data that the sensors show I and can't find pressure mapping. In > addition, it is necessary to unplug the dongle and reinsert it, to make it > work. About this Matthew writes: > *"I have had problems running rtl-sdr on systems with libusb 1.0.11. The > rtl_433 command craps out with a segmentation fault, and the rtl_test > command sometimes leaves the dongle in a weird state that can be cleared > only by unplugging then replugging the dongle .* > > *Using a more recent version of libusb (e.g., 1.0.20) seems to clear > things up. "* > > I don't know how to install a newer version. > > Attached relevant screenshots. > > Any help really appreciated > > I do not know what to do without this group and the people who tried to > help. Thank you. > > Rgds > Gert > > On Thursday, December 12, 2019 at 11:48:22 AM UTC+1, Gert Andersen wrote: >> >> Hi >> >> I'm new to WeeWx and I'm trying to install the SDR software. I have >> followed this guide https://github.com/weewx/weewx/wiki/sdr-rpi-recipe. >> I get an error as You can see on the screenshot. >> >> It is the first time I'm using the SDR software, so I really don't know >> where to look. >> >> Any ideas and thanks for your help? >> >> Rgds >> Gert >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7fbb3a0b-e798-4ef0-a762-040f0ac2d69c%40googlegroups.com.
