One other thing I noticed.... Even though I had set the ip_address in weewx.conf it chose to use a different one. This will be hard to troubleshoot unless you have several GW-1000s to work with.
On Friday, July 31, 2020 at 2:53:30 PM UTC-5 Bill Arthur wrote: > The first time I set this up (on a fresh install) I had low barometer and > two digit wind direction. Wednesday I did a fresh install (on a Pi Zero) > and the barometer and wind direction were OK but the outside temp was about > 30 degrees low. > I'm going to try another fresh install tonight. > > > On Friday, July 31, 2020 at 3:54:51 AM UTC-5 gjr80 wrote: > >> I have released v0.1.0b9 on Github >> <https://github.com/gjr80/weewx-gw1000/releases>. The main change is the >> (I hope) final resolution of the pressures issue. In short, the GW1000 >> Absolute Pressure is now mapped to WeeWX field pressure with WeeWX to >> calculate barometer and altimeter via StdWXCalculate. GW1000 Relative >> Pressure will be passed through to WeeWX as field relbarometer for those >> that may wish to access it. The default behaviour can be changed by >> suitable field map entries in weewx.conf. >> >> b9 includes requires no changes to weewx.conf; however, upgrading to b9 >> by downloading the b9 extension package and installing with the >> wee_extension utility is the preferred means of installing/upgrading to >> b9. >> >> Gary >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3f32f9c6-cfe8-46d2-89c5-1904589190a7n%40googlegroups.com.
