Hi John, After leaving the server run uninterrupted, all of the data being displayed on weewx is ticking to the ip-100 console.
Apologies for my ignorance, where can I exactly find the inclusion of the station volts you noted in your last comm (btw Thanks for addressing). On Monday, January 4, 2021 at 9:58:26 PM UTC-8 jo...@johnkline.com wrote: > > Once I sort this possible discrepancy, I'd like to pick your brain on > adding the Station Volts. > > I added it at head. Station volts will now show up as supplyVoltage. > > On Jan 4, 2021, at 7:44 PM, John Kline <jo...@johnkline.com> wrote: > > > > The IP100 resets the day’s rain total at midnight (according to it’s > clock). It doesn’t really matter to the driver when that happens. The > driver is simply looking for a positive increment in day_rain_total. On a > negative increment (e.g., reset), the driver just saves the last value and > reports 0.0 for rain. > > On Jan 4, 2021, at 7:40 PM, tim lambert <timsl...@comcast.net> wrote: > > > Thanks for the guidance John! I was anticipating to simply have a day > with a clean run, starting at midnight. I should have this info tomorrow. > > I assume the loop will recognize my local timezone to reset to zero at > midnight, recognizing the db is being recorded on GMT? > > Once I sort this possible discrepancy, I'd like to pick your brain on > adding the Station Volts. > > Regards, > > On Monday, January 4, 2021 at 7:34:48 PM UTC-8 jo...@johnkline.com wrote: > >> You don’t to delete records. There isn’t really much to the rain >> calculation. For all rain that occurred while WeeWX is up and running, the >> day_rain_total will increment, the driver will calculate the delta and add >> it to the loop record as ‘rain’. For the discrepancy to occur, 0.09 inches >> would have had to happen while WeeWX wasn’t running. >> >> Let’s try a day where WeeWX has been running, uninterrupted, since >> midnight. >> >> On Jan 4, 2021, at 7:27 PM, tim lambert <timsl...@comcast.net> wrote: >> >> >> >> Thanks for the quick response John! >> >> I am running your version of the IP100 for weewx 4 - version 0.5 >> >> I did restart the weewx today -- had some network issues, compliments of >> Comcast. However, I've witnessed discrepancies between the IP100 Console >> and weewx for several days -- just finally had a chance to get some data >> captures. I may need to capture data again tomorrow (knowing it will be >> raining buckets again). >> >> At this point in time: >> >> >> IP100 weewx >> Rainfall >> 0.06 0.15 >> Rain Rate 0.00 >> 0.00 >> >> Can I truncate (delete all records) from the weewx.sdb (after backing up >> of course) to start fresh, so that we have a solid baseline to evaluate? >> >> On Monday, January 4, 2021 at 7:06:51 PM UTC-8 jo...@johnkline.com wrote: >> >>> Station volts is not in the default map. It wouldn’t be hard to add. >>> >>> I did the IP100 port to WeeWX 4 and fixed bugs in the driver (and bumped >>> the version to 0.5 in my fork). I’m presuming you are running it. >>> >>> Although I’m not currently running the driver, I did run it for almost >>> two years and rain values ALWAYS agreed with my WeeWX instances running the >>> CC3000 driver and talking to the same RainWise weather station. >>> >>> day_rain_total is used to calculate rain. It is not, in itself saved to >>> the database. >>> >>> I have not downloaded your files. You’ll have to tell me if the ip100 >>> console does not agree with the console for today’s rain and, if not, what >>> two values you are seeing. Please list them. >>> >>> If you do have a discrepancy for today’s rain, please state if you >>> restarted weewx today (or if it restarted on its own today). That would be >>> a way to lose rainfall. >>> >>> >>> On Jan 4, 2021, at 6:33 PM, tim lambert <timsl...@comcast.net> wrote: >>> >>> >>> >>> I recently stood up a Raspberry Pi 4 running weewx 4.2.0 with the >>> IP-100 v0.5 extension. It appears the IP-100 Console data does not match >>> the data presented via weewx (using the out-of-box index.html, which is >>> using the SeasonsSkin) -- particularly, the Rain and Rain Rate. I've >>> shared screen shots of both the IP-100 Console and the weewx html >>> >>> Based on some investigation, the log file (attached) indicates the data >>> which is showing on the IP-100 Console is being captured correctly, >>> However, looking at the archive table (attached) in the weewx.sdb, it does >>> not appear the data elements are being posted to the archive table >>> correctly - specifically day_rain_total (log) vs rain (archive table) and >>> rain (log) vs rainRate (archive table). >>> >>> Additionally, the station_volts (log file) are not being posted to the >>> archive table. >>> >>> I'm new to this world, but do have some technical bones -- any guidance >>> on what actions need to be taken to address the discrepancy would be >>> appreciated. >>> >>> Thanks in advance! >>> >>> Archive Table >>> <https://www.dropbox.com/s/cjmul0v4m8561e1/archivedb.csv?dl=0> >>> >>> Syslog <https://www.dropbox.com/s/01s0k9lkjuidram/syslog?dl=0> >>> >>> IP-100 Console >>> <https://www.dropbox.com/s/n84g6ohbcoxlj3p/ip-100%20console.png?dl=0> >>> >>> weewx html page >>> <https://www.dropbox.com/s/2rl6cd5jptakwei/weewx%20html.png?dl=0> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/c7fd8f73-fbdc-4a52-a3fc-c04e6df83889n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/c7fd8f73-fbdc-4a52-a3fc-c04e6df83889n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/633dc989-4be4-4a67-9645-b818367b25b6n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/633dc989-4be4-4a67-9645-b818367b25b6n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/bb28e69f-35c5-416e-8c92-b406fb486933n%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/bb28e69f-35c5-416e-8c92-b406fb486933n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/57795e25-eec6-4956-8ca7-bd1868d314d9n%40googlegroups.com.