Hmmm - your obs_st shows wind,temperature, humidity, pressure but no UV or radiation but the sensor status looks like the uv/light sensor is failed. Definitely contact WF support.
sensor_status = 131076 = binary 100000000000000100 - the leading '1' means light sensor failed according to sensor_status on https://weatherflow.github.io/Tempest/api/udp/v171/ On Monday, November 8, 2021 at 11:38:54 AM UTC-8 Mauro De Lauretis wrote: > Yes, I was thinking the same. > > These are the loop packets by running interactively: > > LOOP: 2021-11-08 20:15:12 CET (1636398912) dateTime: 1636398912, > maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 245, windSpeed: 5.292 > > LOOP: 2021-11-08 20:15:15 CET (1636398915) dateTime: 1636398915, > maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 247, windSpeed: 5.076 > > LOOP: 2021-11-08 20:15:18 CET (1636398918) dateTime: 1636398918, > maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 247, windSpeed: 5.04 > > LOOP: 2021-11-08 20:15:21 CET (1636398921) dateTime: 1636398921, > maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 252, windSpeed: 4.068 > > > By using your tool: > > hub_status => ts = 1636400075 firmware_revision = 171 uptime = > 195702 rssi = -52 > > rapid_wind => ts = 1636400077 mps = 1.35 dir = 252 > > rapid_wind => ts = 1636400080 mps = 1.34 dir = 251 > > rapid_wind =>rapid_wind => ts = 1636400083 mps = 1.47 dir = 251 > > device_status => serial_number = ST-00048481 device_type = tempest ts = > 1636400085 uptime = 280025 voltage = 2.561 firmware_revision = 160 rssi > = -52 hub_rssi = -50 sensor_status = 131076 debug = 0 > > obs_st => timestamp = 1636400084 wind_lull = 1.16 wind_avg = > 1.41 wind_gust = 1.68 wind_direction = 248 wind_sample_interval = 3 > station_pressure = 1010.11 temperature = 13.78 relative_humidity = 95.59 > illuminance = 0 uv = 0.0 solar_radiation = 0 rain_accumulated = > 0.031985 precipitation_type = 1 lightning_strike_avg_distance = 0 > lightning_strike_count = 0 battery = 2.561 report_interval = 1 > firmware_revision = 160 > > --------- > > raw data: {"hub_sn": "HB-00034777", "ob": [1636400278, 1.88, 233], > "serial_number": "ST-00048481", "type": "rapid_wind"} > > raw data: {"hub_sn": "HB-00034777", "ob": [1636400281, 2.2, 233], > "serial_number": "ST-00048481", "type": "rapid_wind"} > > raw data: {"hub_sn": "HB-00034777", "ob": [1636400284, 1.93, 235], > "serial_number": "ST-00048481", "type": "rapid_wind"} > > raw data: {"firmware_revision": "171", "fs": [1, 0, 15675411, > 524288], "mqtt_stats": [119, 4], "radio_stats": [25, 1, 0, 3, 16961], > "reset_flags": "BOR,PIN,POR", "rssi": -57, "seq": 19573, "serial_number": > "HB-00034777", "timestamp": 1636400285, "type": "hub_status", "uptime": > 195912} > > > > > > > Il giorno lunedì 8 novembre 2021 alle 19:49:48 UTC+1 vince ha scritto: > >> maxSolarRad is calculated by weewx, so it sounds like only your wind >> sensor is working unless you typo'd something in weewx.conf. >> >> Voltage looks good. You might have temp+hum sensors that failed but >> before contacting WF again you could check yourself pretty easily. >> >> - run weewx interactively to see its loop packets (users guide link) >> <https://weewx.com/docs/usersguide.htm#Running_directly> >> - or alternately stop weewx and run my UDP listener (github link) >> <https://github.com/vinceskahan/weatherflow-udp-listener> with the >> --raw option to see what the Hub is broadcasting without weewx in the >> game >> at least temporarily. You can run my listener with weewx running if you >> have share_socket=true in weewx for the UDP driver. >> >> Doing a little diagnosis before contacting WF support will probably help >> them out either way. >> >> On Monday, November 8, 2021 at 9:38:19 AM UTC-8 Mauro De Lauretis wrote: >> >>> >>> Hi Vince >>> >>> Thank you for your answer. >>> The only values I get are the following: >>> >>> - maxSolarRad >>> - windDir >>> - windGust >>> - windGustDir >>> - windrun >>> - windSpeed >>> >>> I don't think my gear is in a degrading state because the WF was bought >>> in December 2020 and the unit itself has been exchanged on warranty just >>> once month ago. >>> The Battery Voltage is 2.56 volts at the moment. >>> >>> Greetings >>> Il giorno lunedì 8 novembre 2021 alle 18:15:18 UTC+1 vince ha scritto: >>> >>>> You're going to have to tell us 'which' items have null values, but the >>>> WF gear does back off on which sensors it reports on (and how often) as >>>> the >>>> battery voltage gets low. Perhaps your gear is in a degrading state. >>>> Check your WF app for the voltage and perhaps open a support call via >>>> their >>>> forums. >>>> >>>> On Monday, November 8, 2021 at 8:07:22 AM UTC-8 Mauro De Lauretis wrote: >>>> >>>>> Hi All >>>>> >>>>> I was wondering If somebody could help me by finding out why I get >>>>> NULL daa from some values from my WeatherFlow. Wind Data is the only I >>>>> get >>>>> without problems. This is my weewx.conf: >>>>> >>>>> [WeatherFlowUDP] >>>>> >>>>> driver = user.weatherflowudp >>>>> >>>>> log_raw_packets = False >>>>> >>>>> udp_address = <broadcast> >>>>> >>>>> # udp_address = 0.0.0.0 >>>>> >>>>> # udp_address = 255.255.255.255 >>>>> >>>>> udp_port = 50222 >>>>> >>>>> udp_timeout = 90 >>>>> >>>>> share_socket = True >>>>> >>>>> >>>>> [[sensor_map]] >>>>> >>>>> outTemp = air_temperature.ST-0048481.obs_air >>>>> >>>>> outHumidity = relative_humidity.ST-00048481.obs_air >>>>> >>>>> pressure = station_pressure.ST-00048481.obs_air >>>>> >>>>> lightning_strikes = lightning_strike_count.ST-00048481.obs_air >>>>> >>>>> avg_distance = >>>>> lightning_strike_avg_distance.ST-00048481.obs_air >>>>> >>>>> outTempBatteryStatus = battery.ST-00048481.obs_air >>>>> >>>>> windSpeed = wind_speed.ST-00048481.rapid_wind >>>>> >>>>> windDir = wind_direction.ST-00048481.rapid_wind >>>>> >>>>> lux = illuminance.ST-00048481.obs_sky >>>>> >>>>> UV = uv.ST-00048481.obs_sky >>>>> >>>>> rain = rain_accumulated.ST-00048481.obs_sky >>>>> >>>>> windBatteryStatus = battery.ST-00048481.obs_sky >>>>> >>>>> radiation = solar_radiation.ST-00048481.obs_sky >>>>> >>>>> lightningYYY = distance.ST-00048481.evt_strike >>>>> >>>>> lightningZZZ = energy.ST-00048481.evt_strike >>>>> >>>>> >>>>> >>>>> Greetings >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3e78dc39-c0c5-4d49-9fde-aa34e1f1e5e5n%40googlegroups.com.
