No problem! Thank you anyway for your help :-) Il giorno lunedì 8 novembre 2021 alle 22:32:14 UTC+1 vince ha scritto:
> That's funny. I totally missed seeing that when I was looking to see if > you typo'd the serial number :-) > > On Monday, November 8, 2021 at 1:06:24 PM UTC-8 Mauro De Lauretis wrote: > >> Vince, I got the problem. >> >> I needed to change the sensor map from Air to Tempest by replacing the >> obs_air to obs_st :-) >> If I take a look into my database now I have following values: >> >> - altimeter >> - appTemp >> - barometer >> - cloudbase >> - dewpoint >> - humidex >> - outHumidity >> - outTemp >> - outTempBatteryStatus >> - pressure >> - radiation >> - rain >> - rainRate >> - UV >> - Wind (inl. Gust and Wind Run) >> >> >> The only lightning is showing "NULL" >> >> >> Il giorno lunedì 8 novembre 2021 alle 21:26:35 UTC+1 vince ha scritto: >> >>> Hmmm - your obs_st shows wind,temperature, humidity, pressure but no UV >>> or radiation but the sensor status looks like the uv/light sensor is >>> failed. Definitely contact WF support. >>> >>> sensor_status = 131076 = binary 100000000000000100 - the leading '1' >>> means light sensor failed according to sensor_status on >>> https://weatherflow.github.io/Tempest/api/udp/v171/ >>> >>> >>> >>> On Monday, November 8, 2021 at 11:38:54 AM UTC-8 Mauro De Lauretis wrote: >>> >>>> Yes, I was thinking the same. >>>> >>>> These are the loop packets by running interactively: >>>> >>>> LOOP: 2021-11-08 20:15:12 CET (1636398912) dateTime: 1636398912, >>>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 245, windSpeed: >>>> 5.292 >>>> >>>> LOOP: 2021-11-08 20:15:15 CET (1636398915) dateTime: 1636398915, >>>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 247, windSpeed: >>>> 5.076 >>>> >>>> LOOP: 2021-11-08 20:15:18 CET (1636398918) dateTime: 1636398918, >>>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 247, windSpeed: 5.04 >>>> >>>> LOOP: 2021-11-08 20:15:21 CET (1636398921) dateTime: 1636398921, >>>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 252, windSpeed: >>>> 4.068 >>>> >>>> >>>> By using your tool: >>>> >>>> hub_status => ts = 1636400075 firmware_revision = 171 uptime = >>>> 195702 rssi = -52 >>>> >>>> rapid_wind => ts = 1636400077 mps = 1.35 dir = 252 >>>> >>>> rapid_wind => ts = 1636400080 mps = 1.34 dir = 251 >>>> >>>> rapid_wind =>rapid_wind => ts = 1636400083 mps = 1.47 dir = >>>> 251 >>>> >>>> device_status => serial_number = ST-00048481 device_type = tempest >>>> ts = 1636400085 uptime = 280025 voltage = 2.561 firmware_revision = >>>> 160 rssi = -52 hub_rssi = -50 sensor_status = 131076 debug = 0 >>>> >>>> obs_st => timestamp = 1636400084 wind_lull = 1.16 wind_avg = >>>> 1.41 wind_gust = 1.68 wind_direction = 248 wind_sample_interval = 3 >>>> station_pressure = 1010.11 temperature = 13.78 relative_humidity = >>>> 95.59 >>>> illuminance = 0 uv = 0.0 solar_radiation = 0 rain_accumulated = >>>> 0.031985 precipitation_type = 1 lightning_strike_avg_distance = 0 >>>> lightning_strike_count = 0 battery = 2.561 report_interval = 1 >>>> firmware_revision = 160 >>>> >>>> --------- >>>> >>>> raw data: {"hub_sn": "HB-00034777", "ob": [1636400278, 1.88, 233], >>>> "serial_number": "ST-00048481", "type": "rapid_wind"} >>>> >>>> raw data: {"hub_sn": "HB-00034777", "ob": [1636400281, 2.2, 233], >>>> "serial_number": "ST-00048481", "type": "rapid_wind"} >>>> >>>> raw data: {"hub_sn": "HB-00034777", "ob": [1636400284, 1.93, >>>> 235], "serial_number": "ST-00048481", "type": "rapid_wind"} >>>> >>>> raw data: {"firmware_revision": "171", "fs": [1, 0, 15675411, >>>> 524288], "mqtt_stats": [119, 4], "radio_stats": [25, 1, 0, 3, 16961], >>>> "reset_flags": "BOR,PIN,POR", "rssi": -57, "seq": 19573, "serial_number": >>>> "HB-00034777", "timestamp": 1636400285, "type": "hub_status", "uptime": >>>> 195912} >>>> >>>> >>>> >>>> >>>> >>>> >>>> Il giorno lunedì 8 novembre 2021 alle 19:49:48 UTC+1 vince ha scritto: >>>> >>>>> maxSolarRad is calculated by weewx, so it sounds like only your wind >>>>> sensor is working unless you typo'd something in weewx.conf. >>>>> >>>>> Voltage looks good. You might have temp+hum sensors that failed but >>>>> before contacting WF again you could check yourself pretty easily. >>>>> >>>>> - run weewx interactively to see its loop packets (users guide >>>>> link) <https://weewx.com/docs/usersguide.htm#Running_directly> >>>>> - or alternately stop weewx and run my UDP listener (github link) >>>>> <https://github.com/vinceskahan/weatherflow-udp-listener> with the >>>>> --raw option to see what the Hub is broadcasting without weewx in the >>>>> game >>>>> at least temporarily. You can run my listener with weewx running if >>>>> you >>>>> have share_socket=true in weewx for the UDP driver. >>>>> >>>>> Doing a little diagnosis before contacting WF support will probably >>>>> help them out either way. >>>>> >>>>> On Monday, November 8, 2021 at 9:38:19 AM UTC-8 Mauro De Lauretis >>>>> wrote: >>>>> >>>>>> >>>>>> Hi Vince >>>>>> >>>>>> Thank you for your answer. >>>>>> The only values I get are the following: >>>>>> >>>>>> - maxSolarRad >>>>>> - windDir >>>>>> - windGust >>>>>> - windGustDir >>>>>> - windrun >>>>>> - windSpeed >>>>>> >>>>>> I don't think my gear is in a degrading state because the WF was >>>>>> bought in December 2020 and the unit itself has been exchanged on >>>>>> warranty >>>>>> just once month ago. >>>>>> The Battery Voltage is 2.56 volts at the moment. >>>>>> >>>>>> Greetings >>>>>> Il giorno lunedì 8 novembre 2021 alle 18:15:18 UTC+1 vince ha scritto: >>>>>> >>>>>>> You're going to have to tell us 'which' items have null values, but >>>>>>> the WF gear does back off on which sensors it reports on (and how >>>>>>> often) as >>>>>>> the battery voltage gets low. Perhaps your gear is in a degrading >>>>>>> state. >>>>>>> Check your WF app for the voltage and perhaps open a support call via >>>>>>> their >>>>>>> forums. >>>>>>> >>>>>>> On Monday, November 8, 2021 at 8:07:22 AM UTC-8 Mauro De Lauretis >>>>>>> wrote: >>>>>>> >>>>>>>> Hi All >>>>>>>> >>>>>>>> I was wondering If somebody could help me by finding out why I get >>>>>>>> NULL daa from some values from my WeatherFlow. Wind Data is the only I >>>>>>>> get >>>>>>>> without problems. This is my weewx.conf: >>>>>>>> >>>>>>>> [WeatherFlowUDP] >>>>>>>> >>>>>>>> driver = user.weatherflowudp >>>>>>>> >>>>>>>> log_raw_packets = False >>>>>>>> >>>>>>>> udp_address = <broadcast> >>>>>>>> >>>>>>>> # udp_address = 0.0.0.0 >>>>>>>> >>>>>>>> # udp_address = 255.255.255.255 >>>>>>>> >>>>>>>> udp_port = 50222 >>>>>>>> >>>>>>>> udp_timeout = 90 >>>>>>>> >>>>>>>> share_socket = True >>>>>>>> >>>>>>>> >>>>>>>> [[sensor_map]] >>>>>>>> >>>>>>>> outTemp = air_temperature.ST-0048481.obs_air >>>>>>>> >>>>>>>> outHumidity = relative_humidity.ST-00048481.obs_air >>>>>>>> >>>>>>>> pressure = station_pressure.ST-00048481.obs_air >>>>>>>> >>>>>>>> lightning_strikes = >>>>>>>> lightning_strike_count.ST-00048481.obs_air >>>>>>>> >>>>>>>> avg_distance = >>>>>>>> lightning_strike_avg_distance.ST-00048481.obs_air >>>>>>>> >>>>>>>> outTempBatteryStatus = battery.ST-00048481.obs_air >>>>>>>> >>>>>>>> windSpeed = wind_speed.ST-00048481.rapid_wind >>>>>>>> >>>>>>>> windDir = wind_direction.ST-00048481.rapid_wind >>>>>>>> >>>>>>>> lux = illuminance.ST-00048481.obs_sky >>>>>>>> >>>>>>>> UV = uv.ST-00048481.obs_sky >>>>>>>> >>>>>>>> rain = rain_accumulated.ST-00048481.obs_sky >>>>>>>> >>>>>>>> windBatteryStatus = battery.ST-00048481.obs_sky >>>>>>>> >>>>>>>> radiation = solar_radiation.ST-00048481.obs_sky >>>>>>>> >>>>>>>> lightningYYY = distance.ST-00048481.evt_strike >>>>>>>> >>>>>>>> lightningZZZ = energy.ST-00048481.evt_strike >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Greetings >>>>>>>> >>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/6cdee315-a1fe-4ad8-aebe-e508dd0de352n%40googlegroups.com.