That's funny. I totally missed seeing that when I was looking to see if you typo'd the serial number :-)
On Monday, November 8, 2021 at 1:06:24 PM UTC-8 Mauro De Lauretis wrote: > Vince, I got the problem. > > I needed to change the sensor map from Air to Tempest by replacing the > obs_air to obs_st :-) > If I take a look into my database now I have following values: > > - altimeter > - appTemp > - barometer > - cloudbase > - dewpoint > - humidex > - outHumidity > - outTemp > - outTempBatteryStatus > - pressure > - radiation > - rain > - rainRate > - UV > - Wind (inl. Gust and Wind Run) > > > The only lightning is showing "NULL" > > > Il giorno lunedì 8 novembre 2021 alle 21:26:35 UTC+1 vince ha scritto: > >> Hmmm - your obs_st shows wind,temperature, humidity, pressure but no UV >> or radiation but the sensor status looks like the uv/light sensor is >> failed. Definitely contact WF support. >> >> sensor_status = 131076 = binary 100000000000000100 - the leading '1' >> means light sensor failed according to sensor_status on >> https://weatherflow.github.io/Tempest/api/udp/v171/ >> >> >> >> On Monday, November 8, 2021 at 11:38:54 AM UTC-8 Mauro De Lauretis wrote: >> >>> Yes, I was thinking the same. >>> >>> These are the loop packets by running interactively: >>> >>> LOOP: 2021-11-08 20:15:12 CET (1636398912) dateTime: 1636398912, >>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 245, windSpeed: 5.292 >>> >>> LOOP: 2021-11-08 20:15:15 CET (1636398915) dateTime: 1636398915, >>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 247, windSpeed: 5.076 >>> >>> LOOP: 2021-11-08 20:15:18 CET (1636398918) dateTime: 1636398918, >>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 247, windSpeed: 5.04 >>> >>> LOOP: 2021-11-08 20:15:21 CET (1636398921) dateTime: 1636398921, >>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 252, windSpeed: 4.068 >>> >>> >>> By using your tool: >>> >>> hub_status => ts = 1636400075 firmware_revision = 171 uptime = >>> 195702 rssi = -52 >>> >>> rapid_wind => ts = 1636400077 mps = 1.35 dir = 252 >>> >>> rapid_wind => ts = 1636400080 mps = 1.34 dir = 251 >>> >>> rapid_wind =>rapid_wind => ts = 1636400083 mps = 1.47 dir = >>> 251 >>> >>> device_status => serial_number = ST-00048481 device_type = tempest ts >>> = 1636400085 uptime = 280025 voltage = 2.561 firmware_revision = 160 >>> rssi = -52 hub_rssi = -50 sensor_status = 131076 debug = 0 >>> >>> obs_st => timestamp = 1636400084 wind_lull = 1.16 wind_avg = >>> 1.41 wind_gust = 1.68 wind_direction = 248 wind_sample_interval = 3 >>> station_pressure = 1010.11 temperature = 13.78 relative_humidity = 95.59 >>> illuminance = 0 uv = 0.0 solar_radiation = 0 rain_accumulated = >>> 0.031985 precipitation_type = 1 lightning_strike_avg_distance = 0 >>> lightning_strike_count = 0 battery = 2.561 report_interval = 1 >>> firmware_revision = 160 >>> >>> --------- >>> >>> raw data: {"hub_sn": "HB-00034777", "ob": [1636400278, 1.88, 233], >>> "serial_number": "ST-00048481", "type": "rapid_wind"} >>> >>> raw data: {"hub_sn": "HB-00034777", "ob": [1636400281, 2.2, 233], >>> "serial_number": "ST-00048481", "type": "rapid_wind"} >>> >>> raw data: {"hub_sn": "HB-00034777", "ob": [1636400284, 1.93, 235], >>> "serial_number": "ST-00048481", "type": "rapid_wind"} >>> >>> raw data: {"firmware_revision": "171", "fs": [1, 0, 15675411, >>> 524288], "mqtt_stats": [119, 4], "radio_stats": [25, 1, 0, 3, 16961], >>> "reset_flags": "BOR,PIN,POR", "rssi": -57, "seq": 19573, "serial_number": >>> "HB-00034777", "timestamp": 1636400285, "type": "hub_status", "uptime": >>> 195912} >>> >>> >>> >>> >>> >>> >>> Il giorno lunedì 8 novembre 2021 alle 19:49:48 UTC+1 vince ha scritto: >>> >>>> maxSolarRad is calculated by weewx, so it sounds like only your wind >>>> sensor is working unless you typo'd something in weewx.conf. >>>> >>>> Voltage looks good. You might have temp+hum sensors that failed but >>>> before contacting WF again you could check yourself pretty easily. >>>> >>>> - run weewx interactively to see its loop packets (users guide link) >>>> <https://weewx.com/docs/usersguide.htm#Running_directly> >>>> - or alternately stop weewx and run my UDP listener (github link) >>>> <https://github.com/vinceskahan/weatherflow-udp-listener> with the >>>> --raw option to see what the Hub is broadcasting without weewx in the >>>> game >>>> at least temporarily. You can run my listener with weewx running if >>>> you >>>> have share_socket=true in weewx for the UDP driver. >>>> >>>> Doing a little diagnosis before contacting WF support will probably >>>> help them out either way. >>>> >>>> On Monday, November 8, 2021 at 9:38:19 AM UTC-8 Mauro De Lauretis wrote: >>>> >>>>> >>>>> Hi Vince >>>>> >>>>> Thank you for your answer. >>>>> The only values I get are the following: >>>>> >>>>> - maxSolarRad >>>>> - windDir >>>>> - windGust >>>>> - windGustDir >>>>> - windrun >>>>> - windSpeed >>>>> >>>>> I don't think my gear is in a degrading state because the WF was >>>>> bought in December 2020 and the unit itself has been exchanged on >>>>> warranty >>>>> just once month ago. >>>>> The Battery Voltage is 2.56 volts at the moment. >>>>> >>>>> Greetings >>>>> Il giorno lunedì 8 novembre 2021 alle 18:15:18 UTC+1 vince ha scritto: >>>>> >>>>>> You're going to have to tell us 'which' items have null values, but >>>>>> the WF gear does back off on which sensors it reports on (and how often) >>>>>> as >>>>>> the battery voltage gets low. Perhaps your gear is in a degrading >>>>>> state. >>>>>> Check your WF app for the voltage and perhaps open a support call via >>>>>> their >>>>>> forums. >>>>>> >>>>>> On Monday, November 8, 2021 at 8:07:22 AM UTC-8 Mauro De Lauretis >>>>>> wrote: >>>>>> >>>>>>> Hi All >>>>>>> >>>>>>> I was wondering If somebody could help me by finding out why I get >>>>>>> NULL daa from some values from my WeatherFlow. Wind Data is the only I >>>>>>> get >>>>>>> without problems. This is my weewx.conf: >>>>>>> >>>>>>> [WeatherFlowUDP] >>>>>>> >>>>>>> driver = user.weatherflowudp >>>>>>> >>>>>>> log_raw_packets = False >>>>>>> >>>>>>> udp_address = <broadcast> >>>>>>> >>>>>>> # udp_address = 0.0.0.0 >>>>>>> >>>>>>> # udp_address = 255.255.255.255 >>>>>>> >>>>>>> udp_port = 50222 >>>>>>> >>>>>>> udp_timeout = 90 >>>>>>> >>>>>>> share_socket = True >>>>>>> >>>>>>> >>>>>>> [[sensor_map]] >>>>>>> >>>>>>> outTemp = air_temperature.ST-0048481.obs_air >>>>>>> >>>>>>> outHumidity = relative_humidity.ST-00048481.obs_air >>>>>>> >>>>>>> pressure = station_pressure.ST-00048481.obs_air >>>>>>> >>>>>>> lightning_strikes = >>>>>>> lightning_strike_count.ST-00048481.obs_air >>>>>>> >>>>>>> avg_distance = >>>>>>> lightning_strike_avg_distance.ST-00048481.obs_air >>>>>>> >>>>>>> outTempBatteryStatus = battery.ST-00048481.obs_air >>>>>>> >>>>>>> windSpeed = wind_speed.ST-00048481.rapid_wind >>>>>>> >>>>>>> windDir = wind_direction.ST-00048481.rapid_wind >>>>>>> >>>>>>> lux = illuminance.ST-00048481.obs_sky >>>>>>> >>>>>>> UV = uv.ST-00048481.obs_sky >>>>>>> >>>>>>> rain = rain_accumulated.ST-00048481.obs_sky >>>>>>> >>>>>>> windBatteryStatus = battery.ST-00048481.obs_sky >>>>>>> >>>>>>> radiation = solar_radiation.ST-00048481.obs_sky >>>>>>> >>>>>>> lightningYYY = distance.ST-00048481.evt_strike >>>>>>> >>>>>>> lightningZZZ = energy.ST-00048481.evt_strike >>>>>>> >>>>>>> >>>>>>> >>>>>>> Greetings >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/68689c84-5099-4e2c-bc54-2c74794517f9n%40googlegroups.com.