For some reason, every channel in your console is active. You can try shutting them all off except the ISS. Either do it through the console ( see your owners manual), or wee_device can do this.
Generally the ISS is on channel 1. On Mon, Feb 14, 2022 at 5:37 PM Rob Cranfill <robcranf...@gmail.com> wrote: > Well that 'splains it! :-) I'll set about removing those (and cleaning up > the DB, right? As detailed elsewhere in this thread?) > > As requested, > > pi@pi3b:/etc/weewx $ wee_device --info > Using configuration file /etc/weewx/weewx.conf > Using Vantage driver version 3.2.3 (weewx.drivers.vantage) > Unable to wake up console... sleeping > Unable to wake up console... retrying > Querying... > Davis Vantage EEPROM settings: > > CONSOLE TYPE: Vantage Vue > > CONSOLE FIRMWARE: > Date: Feb 3 2015 > Version: 4.18 > > CONSOLE SETTINGS: > Archive interval: 60 (seconds) > Altitude: 150 (foot) > Wind cup type: large > Rain bucket type: 0.01 inches > Rain year start: 1 > Onboard time: 2022-02-14 17:34:27 > > CONSOLE DISPLAY UNITS: > Barometer: mbar > Temperature: degree_F > Rain: inch > Wind: mile_per_hour > > CONSOLE STATION INFO: > Latitude (onboard): +47.6 > Longitude (onboard): -122.3 > Use manual or auto DST? AUTO > DST setting: N/A > Use GMT offset or zone code? ZONE_CODE > Time zone code: 4 > GMT offset: N/A > Temperature logging: LAST > Retransmit channel: OFF (0) > > TRANSMITTERS: > Channel Receive Repeater Type > 1 active none iss > 2 active none (N/A) > 3 active none (N/A) > 4 active none (N/A) > 5 active none (N/A) > 6 active none (N/A) > 7 active none (N/A) > 8 active none (N/A) > > RECEPTION STATS: > Total packets received: 24546 > Total packets missed: 143 > Number of resynchronizations: 0 > Longest good stretch: 677 > Number of CRC errors: 16 > > BAROMETER CALIBRATION DATA: > Current barometer reading: 29.980 inHg > Altitude: 150 feet > Dew point: 42 F > Virtual temperature: 48 F > Humidity correction factor: 1.8 > Correction ratio: 1.006 > Correction constant: +0.000 inHg > Gain: 0.000 > Offset: -33.000 > > OFFSETS: > Wind direction: +0 deg > Inside Temperature: +0.0 F > Inside Humidity: +0 % > Outside Temperature: +0.0 F > Outside Humidity: +0 % > > On Monday, February 14, 2022 at 3:28:09 PM UTC-8 tke...@gmail.com wrote: > >> Rob, >> >> Before this version, weewx only reported on explicit tags. For example, >> if you didn't put $current.soilTemp1 in the template, you were not going to >> see it in the report. >> >> Now it basically reports on everything that's in the database. >> >> To stop it, look in the skin.conf file for the Seasons skin. Near the >> top, you will see a stanza labelled [DisplayOptions]. In this stanza are >> lists of the various types. Just remove any type for which you do not want >> to be included in the report. >> >> As for where these values are coming from, I have no idea. Either they >> are being emitted by your Vantage Vue, or they are being introduced by one >> of your extensions. It's also possible you are picking up sensors from a >> neighbor. >> >> In fact, now that I think about it, it would be worth seeing which >> sensors your Vantage is aware of. Try running >> >> *wee_device --info* >> >> >> -tk >> >> On Mon, Feb 14, 2022 at 3:15 PM Rob Cranfill <robcr...@gmail.com> wrote: >> >>> First, I guess I'm just confused as to why I'm getting all this good >>> stuff when my previous (<4.6) installation was happy for so long..... >>> >>> I just did a quick 'grep' looking around, and I do see that the standard >>> Seasons skin *defines* a bunch of these unwanted values. Is that enough to >>> cause them to be reported? >>> >>> On Monday, February 14, 2022 at 11:27:03 AM UTC-8 vince wrote: >>> >>>> You have to have something mapped to a lot of leaf and soil sensors. >>>> We'd need to see all your skin.conf files and your weewx.conf file to know >>>> for sure where they're coming from. If you can't find it, I'd suggest you >>>> use StdQC to just filter out the extraneous things (link to User's >>>> Guide) <https://weewx.com/docs/usersguide.htm#%5B%5BMinMax%5D%5D>. >>>> >>>> All your bogus temperatures seem to read crazy low numbers. Set the >>>> min/max to a range you'll never see and weewx should ignore them even if >>>> you can't find a way to turn them off. Perhaps something like the >>>> following (untested): >>>> >>>> [StdQC] >>>> [[MinMax]] >>>> leafTemp1 = 200, 201, deg_F >>>> leafTemp2 = 200, 201, deg_F >>>> soilTemp1 = 200, 201, deg_F >>>> soilTemp2 = 200, 201, deg_F >>>> soilTemp2 = 200, 201, deg_F >>>> soilTemp2 = 200, 201, deg_F >>>> >>>> >>>> >>>> -- >>> >> You received this message because you are subscribed to the Google Groups >>> "weewx-user" group. >>> >> To unsubscribe from this group and stop receiving emails from it, send an >>> email to weewx-user+...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- -tk -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zECcPGoGqyRpjYRt9JyyqvNrr5zsyijoc7R-V6CgGv9x5A%40mail.gmail.com.
