Rob, I'll be curious to hear whether you continue to get bogus database entries after doing this.
On Wed, Feb 16, 2022 at 11:50 AM Rob Cranfill <robcranf...@gmail.com> wrote: > Aha, I see that now in the 'info' output. > > After repeated applications of the proper wee_device command, > > wee_device --set-transmitter-type=*N*,10 > > I now have: > TRANSMITTERS: > Channel Receive Repeater Type > 1 active none iss > 2 inactive none (N/A) > 3 inactive none (N/A) > 4 inactive none (N/A) > 5 inactive none (N/A) > 6 inactive none (N/A) > 7 inactive none (N/A) > 8 inactive none (N/A) > > > Thanks! > > On Tuesday, February 15, 2022 at 11:35:22 AM UTC-8 tke...@gmail.com wrote: > >> For some reason, every channel in your console is active. You can try >> shutting them all off except the ISS. Either do it through the console ( >> see your owners manual), or wee_device can do this. >> >> Generally the ISS is on channel 1. >> >> On Mon, Feb 14, 2022 at 5:37 PM Rob Cranfill <robcr...@gmail.com> wrote: >> >>> Well that 'splains it! :-) I'll set about removing those (and cleaning >>> up the DB, right? As detailed elsewhere in this thread?) >>> >>> As requested, >>> >>> pi@pi3b:/etc/weewx $ wee_device --info >>> Using configuration file /etc/weewx/weewx.conf >>> Using Vantage driver version 3.2.3 (weewx.drivers.vantage) >>> Unable to wake up console... sleeping >>> Unable to wake up console... retrying >>> Querying... >>> Davis Vantage EEPROM settings: >>> >>> CONSOLE TYPE: Vantage Vue >>> >>> CONSOLE FIRMWARE: >>> Date: Feb 3 2015 >>> Version: 4.18 >>> >>> CONSOLE SETTINGS: >>> Archive interval: 60 (seconds) >>> Altitude: 150 (foot) >>> Wind cup type: large >>> Rain bucket type: 0.01 inches >>> Rain year start: 1 >>> Onboard time: 2022-02-14 17:34:27 >>> >>> CONSOLE DISPLAY UNITS: >>> Barometer: mbar >>> Temperature: degree_F >>> Rain: inch >>> Wind: mile_per_hour >>> >>> CONSOLE STATION INFO: >>> Latitude (onboard): +47.6 >>> Longitude (onboard): -122.3 >>> Use manual or auto DST? AUTO >>> DST setting: N/A >>> Use GMT offset or zone code? ZONE_CODE >>> Time zone code: 4 >>> GMT offset: N/A >>> Temperature logging: LAST >>> Retransmit channel: OFF (0) >>> >>> TRANSMITTERS: >>> Channel Receive Repeater Type >>> 1 active none iss >>> 2 active none (N/A) >>> 3 active none (N/A) >>> 4 active none (N/A) >>> 5 active none (N/A) >>> 6 active none (N/A) >>> 7 active none (N/A) >>> 8 active none (N/A) >>> >>> RECEPTION STATS: >>> Total packets received: 24546 >>> Total packets missed: 143 >>> Number of resynchronizations: 0 >>> Longest good stretch: 677 >>> Number of CRC errors: 16 >>> >>> BAROMETER CALIBRATION DATA: >>> Current barometer reading: 29.980 inHg >>> Altitude: 150 feet >>> Dew point: 42 F >>> Virtual temperature: 48 F >>> Humidity correction factor: 1.8 >>> Correction ratio: 1.006 >>> Correction constant: +0.000 inHg >>> Gain: 0.000 >>> Offset: -33.000 >>> >>> OFFSETS: >>> Wind direction: +0 deg >>> Inside Temperature: +0.0 F >>> Inside Humidity: +0 % >>> Outside Temperature: +0.0 F >>> Outside Humidity: +0 % >>> >>> On Monday, February 14, 2022 at 3:28:09 PM UTC-8 tke...@gmail.com wrote: >>> >>>> Rob, >>>> >>>> Before this version, weewx only reported on explicit tags. For example, >>>> if you didn't put $current.soilTemp1 in the template, you were not going to >>>> see it in the report. >>>> >>>> Now it basically reports on everything that's in the database. >>>> >>>> To stop it, look in the skin.conf file for the Seasons skin. Near the >>>> top, you will see a stanza labelled [DisplayOptions]. In this stanza are >>>> lists of the various types. Just remove any type for which you do not want >>>> to be included in the report. >>>> >>>> As for where these values are coming from, I have no idea. Either they >>>> are being emitted by your Vantage Vue, or they are being introduced by one >>>> of your extensions. It's also possible you are picking up sensors from a >>>> neighbor. >>>> >>>> In fact, now that I think about it, it would be worth seeing which >>>> sensors your Vantage is aware of. Try running >>>> >>>> *wee_device --info* >>>> >>>> >>>> -tk >>>> >>>> On Mon, Feb 14, 2022 at 3:15 PM Rob Cranfill <robcr...@gmail.com> >>>> wrote: >>>> >>>>> First, I guess I'm just confused as to why I'm getting all this good >>>>> stuff when my previous (<4.6) installation was happy for so long..... >>>>> >>>>> I just did a quick 'grep' looking around, and I do see that the >>>>> standard Seasons skin *defines* a bunch of these unwanted values. Is that >>>>> enough to cause them to be reported? >>>>> >>>>> On Monday, February 14, 2022 at 11:27:03 AM UTC-8 vince wrote: >>>>> >>>>>> You have to have something mapped to a lot of leaf and soil sensors. >>>>>> We'd need to see all your skin.conf files and your weewx.conf file to >>>>>> know for sure where they're coming from. If you can't find it, I'd >>>>>> suggest >>>>>> you use StdQC to just filter out the extraneous things (link to >>>>>> User's Guide) >>>>>> <https://weewx.com/docs/usersguide.htm#%5B%5BMinMax%5D%5D>. >>>>>> >>>>>> All your bogus temperatures seem to read crazy low numbers. Set the >>>>>> min/max to a range you'll never see and weewx should ignore them even if >>>>>> you can't find a way to turn them off. Perhaps something like the >>>>>> following (untested): >>>>>> >>>>>> [StdQC] >>>>>> [[MinMax]] >>>>>> leafTemp1 = 200, 201, deg_F >>>>>> leafTemp2 = 200, 201, deg_F >>>>>> soilTemp1 = 200, 201, deg_F >>>>>> soilTemp2 = 200, 201, deg_F >>>>>> soilTemp2 = 200, 201, deg_F >>>>>> soilTemp2 = 200, 201, deg_F >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>> >>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> >>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to weewx-user+...@googlegroups.com. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> -tk >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/d9e5e945-08e5-4f70-98e7-2314ea43e767n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/d9e5e945-08e5-4f70-98e7-2314ea43e767n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEBaZr73ZhmE_CRYsn_wDyFckYS3YbMXbjRjSHJh%2B6iWkA%40mail.gmail.com.