Hello i need to have a a polling timeout greater than 20 seconds because our lines are RNIS . thank you if you can help me.. Francis Martin ----- Original Message ----- From: "Bruce Shaw" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, April 20, 2002 12:13 AM Subject: RE: [WhatsUp Forum] snmp traps
> Must have defaulted to on in previous versions or I don't remember turning > it on. When I installed real version, it remember most of my settings from > trial. Maybe it forgot that one. Still be nice if it was easier to find in > the manual. > > -----Original Message----- > From: Mark Singh [mailto:[EMAIL PROTECTED]] > Sent: Friday, April 19, 2002 12:13 PM > To: [EMAIL PROTECTED] > Subject: RE: [WhatsUp Forum] snmp traps > > > Bruce, > Trap Handler option has always been there, at least way back to version 5. > > If trap handler was enabled, you would have found some errors in the log > like the ones described in our Knowledge Base articles: > http://support.ipswitch.com/kb/WG-19980120-DD46.htm > or > http://support.ipswitch.com/kb/WG-20001228-DM01.htm > > Whether the trigger is 1 or 8, the alert on traps will be generated > immediately because it is not initiated via a poll. > > As far as how to find the Services window in W2K, you got us with that one:) > > Mark Singh > WhatsUp Gold Support Manager > Ipswitch, Inc._________ > ______________<>< > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Bruce Shaw > Sent: Friday, April 19, 2002 1:18 PM > To: '[EMAIL PROTECTED]' > Subject: RE: [WhatsUp Forum] snmp traps > > > When did this show up? ...and this is documented where in the manual? > (eventually found it on page 195 - no index entry, no pretty picture like > the one below - an afterthought?) > > Works now. Got hooted at twice right away (mdlogd sends two notifications) > even though trigger was set to 8. > > In windows 2000, services is in Administrative tools, not directly off the > control panel. > > Please start putting 2000/XP stuff in the documentation. > > -----Original Message----- > From: Mark Singh [mailto:[EMAIL PROTECTED]] > Sent: Friday, April 19, 2002 6:47 AM > To: [EMAIL PROTECTED] > Subject: RE: [WhatsUp Forum] snmp traps > > > Bruce, > I see you mentioned trigger, so I supposed you are talking alert trigger > there. So go to Configure | Program Options and SNMP Traps and verify that > Trap Handler is enabled. > > If it is enabled, then in Control Panel go to Services and see if SNMP Trap > Service is running. If it is running, disable it. (it is trying to listen > on port 162 also). > > Mark Singh > WhatsUp Gold Support Manager > Ipswitch, Inc._________ > ______________<>< > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Bruce Shaw > Sent: Thursday, April 18, 2002 6:11 PM > To: '[EMAIL PROTECTED]' > Subject: RE: [WhatsUp Forum] snmp traps > > > Addendum - the trap log is empty. Changed the trigger to 1 (and immediately > got hooted at because of a lost packet) and retried. Nothing. SNMP is > working correctly, I can view the machine and the hme0 card. > > I've got a 7.0 install CD. Should I revert back? > > > -----Original Message----- > From: Bruce Shaw > Sent: Thursday, April 18, 2002 1:53 PM > To: '[EMAIL PROTECTED]' > Subject: RE: [WhatsUp Forum] snmp traps > > > SNMP alerts appear to be broken. I just tried an alert that worked with > previous versions and nothing happened. > > I'm using a SOlaris server using SOlstice disksuite. It uses mdlogd. My > /etc/opt/SUNWMd/mdlogd.cf file contains the right information and nothing > has changed. When I deliberately break a mirror (by unplugging a hard > drive) once solstice disksuite understands that something is broken, I > should get an email and sound alert. Tried it twice - no response. > > The only thing that has changed is the SNMP community name. This shouldn't > affect traps, should it? It's acknowledging SNMP is working. > > -----Original Message----- > From: Mark Singh [mailto:[EMAIL PROTECTED]] > Sent: Thursday, April 18, 2002 12:19 PM > To: [EMAIL PROTECTED] > Subject: RE: [WhatsUp Forum] snmp traps > > > Bruce, > what do you mean by "did my standard check and came up empty"? What are you > experiencing? (are you not receiving traps, are you not happy with the trap > notifications or are you not able to filter for specific trap notification) > > Mark Singh > WhatsUp Gold Support Manager > Ipswitch, Inc._________ > ______________<>< > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Bruce Shaw > Sent: Thursday, April 18, 2002 12:17 PM > To: '[EMAIL PROTECTED]' > Subject: RE: [WhatsUp Forum] snmp traps > > > I'm using 7.0.2 and did my standard check and came up empty. > > This is what I bought the thing for in the first place. > > I need this fixed now or I want my money (and 6 months development work) > back. > > I will run beta if necessary. > > -----Original Message----- > From: Rich [mailto:[EMAIL PROTECTED]] > Sent: Thursday, April 18, 2002 8:07 AM > To: [EMAIL PROTECTED] > Subject: Re: [WhatsUp Forum] snmp traps > > > What version of WUG are you using? It is our experience that the last > upgrade pretty much made WUG SNMP Trap Notification useless..... we > ran it by Support and they said that is the way it is, live with it. > This after we worked long and hard with earlier versions to get > notification working to email and cell phones! > I am looking around for another product. > Rich > ---------- > VP - Operations > ISPhone Inc > +1 231 929 0970 > > ----- Original Message ----- > From: "Glatt, Robert" <[EMAIL PROTECTED]> > To: "'wug'" <[EMAIL PROTECTED]> > Sent: Thursday, April 18, 2002 9:08 AM > Subject: [WhatsUp Forum] snmp traps > > > > Here are 2 traps that I receive from my Cisco 6509 Catalyst switch. I > have > > the notification set up to send an alert on any snmp trap. What I > would like > > to do is only send an alert if the first trap is received. I cannot > set the > > trap to be 41.2-6.1 because it is true for both of them. Ideally, I > would > > want to use ciscoMgmt.41.1.2.3.1.3.0.=6 > > I must be missing something simple as it doesn't seem to work. Anyone > want > > to show me the error of my ways??? > > > > > > Trap(ciscoMgmt.41.2-6.1) ciscoMgmt.41.2 Addr:192.97.252.6 Int:6 Int:1 > > Tick:"83 days 14:53:34" ciscoMgmt.41.1.2.3.1.2.0=MGMT > > ciscoMgmt.41.1.2.3.1.3.0=6 ciscoMgmt.41.1.2.3.1.4.0=MGMT > > ciscoMgmt.41.1.2.3.1.5.0="2002 Apr 18 08:17:02 EDST -04:30 > > %MGMT-5-ERRDISPORTENABLED:Port 5/14 err-disabled by duplex-mismatch > enabled > > by errdisable timeout" ciscoMgmt.41.1.2.3.1.6.0=722481430 > > > > > > Trap(ciscoMgmt.41.2-6.1) ciscoMgmt.41.2 Addr:192.97.252.6 Int:6 Int:1 > > Tick:"83 days 14:51:50" ciscoMgmt.41.1.2.3.1.2.0=SYS > > ciscoMgmt.41.1.2.3.1.3.0=4 ciscoMgmt.41.1.2.3.1.4.0=SYS > > ciscoMgmt.41.1.2.3.1.5.0="2002 Apr 18 08:15:18 EDST -04:30 > > %SYS-3-PORT_COLLDIS:Port 5/14 disabled due to collision" > > ciscoMgmt.41.1.2.3.1.6.0=722471026 > > > > > > thanks > > bob > > > > Please visit http://www.ipswitch.com/support/mailing-lists.html > > to be removed from this list. > > > > An Archive of this list is available at: > > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
