|
A
simple question - did you enable the SNMP trap server on the WhatsUp machine?
(It ships disabled I believe)
Go to
Configure -> Program Options -> Event Servers, then select "SNMP Trap" and
click Configure. Make sure "Listen for messages" is checked, and the port is
162.
Thanks,
Andrew Harwood IT&T Operations Officer Infrastructure Management (Room 161) CORPORATE INFORMATION TRANSPORT SA Phone: +61 8 8343-2639 Fax: +61 8 8343-2255 E-mail: mailto:[EMAIL PROTECTED] Internet site URL: http://www.transport.sa.gov.au Disclaimer: The information contained in this e-mail message may be confidential, and may also be the subject of privilege or public interest immunity. This e-mail and any attached files should be scanned to detect viruses and no liability for loss or damage resulting from the use of any attached files is accepted. If you are not the intended recipient, any use, disclosure or reproduction of this document is unauthorised. If you have received this e-mail in error please telephone +61 8 8343 2222. -----Original Message-----
From: Goran Jovanovic [mailto:] Sent: Wednesday, 16 July 2003 11:18 AM To: [EMAIL PROTECTED] Subject: [WhatsUp Forum] SNMP Traps Hi all,
I just started to evaluate WUG today. Figured out the linked maps and got that working.
Now my big question is this. I want to receive SNMP traps from various devices (such as Compaq servers). These traps will tell me when a power supply fails of if a drive in an array fails etc (hardware stuff). I set another server to sent traps and I know that it sent them but I cannot get WUG to display anything regarding the SNMP trap. I got my server on the map and it is being polled via ICMP (is green) and I went into properties and under events selected Any SNMP trap (I even went in and found the Compaq Power Supply Failure trap). But when I pull the power on one of the power supplies nothing is shown on the map. My triangle in the top left corner is still there and still white.
I complied the Compaq MIBs into the system so I can see all the traps.
Any ideas on what I am missing?
Also based on what I am seeing I am going to have to go into each server and associate the traps I want to be displayed / trapped for each server. Is that correct?
Thanks all.
Goran Jovanovic The LAN Shoppe 2345 Yonge Street, Suite 302 Toronto, Ontario M4P 2E5 Phone: (416) 440-1167 x-2113 Cell: (416) 931-0688 E-Mail: [EMAIL PROTECTED]
<snip snip -- all irrelevant thread material removed> |
<<attachment: image001.gif>>
