That's a big question Jim.
The first one is, that depends. You'll know what works and what won't when
you fire them up and do your speed tests etc. Hopefully you'll be using a
radio that has a spectrum checker in it too.
On the channel width setting. As a rule, I suggest people use that minimum
that they can. You'll need the room to put in more radios at some point
down the road. Leaving as much spectrum open as you can is generally a good
thing.
laters,
marlon
----- Original Message -----
From: "Jim Stout" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Sunday, April 08, 2007 8:14 AM
Subject: [WISPA] 900 MHz Help
Folks,
I'm just entering into the 900MHz space and would appreciate any advice
on channel selection and channel width settings.
TIA, Jim....
Jim Stout
LTO Communications, LLC
15701 Henry Andrews Dr
Pleasant Hill, MO 64080
(816) 305-1076 - Mobile
(816) 497-0033 - Pager
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/