Don't know what equipment you are using but rule of thumb is horizontal
pol unless you in the middle of no where or you have scanned the
spectrum. Small channel size (5mhz) 10 or 20)only if you are if you have
done a spectrum scan to make sure things are clear. You will find a lot
more interference on V pol but you have a better selection of antennas
to choose from. Sectorize if possible and stay away from omni's if
possible again to avoid interference, this will of course depend on you
local environment. If your equipment allows, and your in a high
interference area. consider decreasing your MTU size from 1500 to
something small like 32 ... this will decrease your through put but more
packets will get through in the presence of interference.
Erik
Jim Stout wrote:
Folks,
I'm just entering into the 900MHz space and would appreciate any advice on channel selection and channel width settings.
TIA, Jim....
Jim Stout
LTO Communications, LLC
15701 Henry Andrews Dr
Pleasant Hill, MO 64080
(816) 305-1076 - Mobile
(816) 497-0033 - Pager
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/