I've had this problem before when I set the interface on the AP to a certain type. I believe I had to set it to AP Bridge or AP by itself in configuring a point-to-point.
Mark Nash UnwiredWest 78 Centennial Loop Suite E Eugene, OR 97401 541-998-5555 541-998-5599 fax http://www.unwiredwest.com ----- Original Message ----- From: "rabbtux rabbtux" <[EMAIL PROTECTED]> To: "WISPA General List" <wireless@wispa.org> Sent: Tuesday, July 01, 2008 9:01 PM Subject: Re: [WISPA] help! replacement MT based 5.8G system connects,but no ping! > On the AP side (producion system for year), it shows this test rb133 > registered with rx 1M and tx to it of 6M. Its like the rb133 system > refuses to transmit at any rate above 1M?? > Still, no ping between the two. > > On 7/1/08, rabbtux rabbtux <[EMAIL PROTECTED]> wrote: >> no WDS and no Bridging involved. Using MT ping utility from either end. >> >> I have swapped out CM9 radios and gone to a 'clean' rb133 with the >> same ros2.9.50 as the AP. >> >> I moved the client closer and noticed one ODD thing. With -72db on >> both sides or even with -62db, the Registered rate is always 1M? yes, >> this is 802.11a, yes the radios are set to 5.8G. The 'default' rates >> are selected for radios on each end. Any ideas?? >> >> >> On 7/1/08, Mac Dearman <[EMAIL PROTECTED]> wrote: >> > 1. Kill all encryption on both ends, get them to pass traffic and then >> > proceed with enabling encryption. >> > 2. be sure you have WDS in the bridge or have both sides set to >> dynamic & >> > bridge1 (or whatever it is) >> > 3. Be sure of your gateway on both sides (this is generally the >> easiest to >> > jack up) >> > >> > Mac >> > >> > >> > >> > >> > >> > > -----Original Message----- >> > > From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On >> > > Behalf Of rabbtux rabbtux >> > > Sent: Tuesday, July 01, 2008 7:50 PM >> > > To: WISPA General List >> > > Subject: Re: [WISPA] help! replacement MT based 5.8G system >> connects, >> > > but no ping! >> > > >> > > IP address on singel CM9 radio interface. Just Swapped out the pre >> > > configured RB333 system with a clean RB133 and freshly configured >> to >> > > the other AP. Still, it associates with encryption key, but no >> ping! >> > > (hope I still have hair by morning :-) >> > > >> > > On 7/1/08, Mark Nash <[EMAIL PROTECTED]> wrote: >> > > > Are the IP addresses on a bridge or an Interface? >> > > > >> > > > Mark Nash >> > > > UnwiredWest >> > > > 78 Centennial Loop >> > > > Suite E >> > > > Eugene, OR 97401 >> > > > 541-998-5555 >> > > > 541-998-5599 fax >> > > > http://www.unwiredwest.com >> > > > >> > > > ----- Original Message ----- >> > > > From: "rabbtux rabbtux" <[EMAIL PROTECTED]> >> > > > To: "WISPA General List" <wireless@wispa.org> >> > > > Sent: Tuesday, July 01, 2008 5:18 PM >> > > > Subject: [WISPA] help! replacement MT based 5.8G system >> connects,but >> > > no >> > > > ping! >> > > > >> > > > >> > > > > All, >> > > > > >> > > > > I'm at wits end as my network is crippled and I'm having >> problems >> > > > > getting the replacement system to talk. Both systems have the >> > > correct >> > > > > security key, as they will not register to each other >> correctly >> > > > > without it. The new system is ros3.9 and it is PTP with >> another >> > > > > ros2.9.50 system. These two systems connect with 65dbm signal >> > > > > strength but I can't ping from either end. I, of course >> > > double/triple >> > > > > checked interface IPs and masks. I have used MT for about a >> year >> > > and >> > > > > a half, without issue, however, I'm probably missing something >> > > here as >> > > > > I work with looming customer calls about when will the >> replacement >> > > > > system be up! >> > > > > >> > > > > Anyway, It would be great to speak to someone with more MT >> > > experience >> > > > > than myself on this one! Please hit me off list for details. >> > > > > >> > > > > Thank you kindly, >> > > > > Marshall Craw >> > > > > Rabbit Meadows Tech. >> > > > > >> > > > > >> > > > >> > > > >> > ------------------------------------------------------------------- >> > > ------------- >> > > > > WISPA Wants You! Join today! >> > > > > http://signup.wispa.org/ >> > > > >> > ------------------------------------------------------------------ >> > > -------------- >> > > > > >> > > > > WISPA Wireless List: wireless@wispa.org >> > > > > >> > > > > Subscribe/Unsubscribe: >> > > > > http://lists.wispa.org/mailman/listinfo/wireless >> > > > > >> > > > > Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > >> -------------------------------------------------------------------- >> > > ------------ >> > > > WISPA Wants You! Join today! >> > > > http://signup.wispa.org/ >> > > >> -------------------------------------------------------------------- >> > > ------------ >> > > > >> > > > WISPA Wireless List: wireless@wispa.org >> > > > >> > > > Subscribe/Unsubscribe: >> > > > http://lists.wispa.org/mailman/listinfo/wireless >> > > > >> > > > Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > >> > > >> > > >> > >> > >> > ----------------------------------------------------------------------- >> > >> > > --------- >> > > WISPA Wants You! Join today! >> > > http://signup.wispa.org/ >> > >> > ----------------------------------------------------------------------- >> > > --------- >> > > >> > > WISPA Wireless List: wireless@wispa.org >> > > >> > > Subscribe/Unsubscribe: >> > > http://lists.wispa.org/mailman/listinfo/wireless >> > > >> > > Archives: http://lists.wispa.org/pipermail/wireless/ >> > >> > > No virus found in this incoming message. >> > > Checked by AVG. >> > > Version: 8.0.101 / Virus Database: 270.4.3/1528 - Release Date: >> > > 7/1/2008 7:26 AM >> > >> > >> > >> > >> >> > >> -------------------------------------------------------------------------------- >> > WISPA Wants You! Join today! >> > http://signup.wispa.org/ >> >> > >> -------------------------------------------------------------------------------- >> > >> > WISPA Wireless List: wireless@wispa.org >> > >> > Subscribe/Unsubscribe: >> > http://lists.wispa.org/mailman/listinfo/wireless >> > >> > Archives: http://lists.wispa.org/pipermail/wireless/ >> > >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/