Assuming these use Atheros chipsets, try setting the beacon interval to 1000. This mitigates a driver-level issue that crops up when there's a lot of interference.
Tom S. ----- Original Message ----- From: "John Scrivner" <j...@scrivner.com> To: "WISPA General List" <wireless@wispa.org> Sent: Thursday, August 06, 2009 7:09 AM Subject: [WISPA] Tranzeo 900 Latency > We have a couple of sectors of 900 MHz Tranzeo which were running fine > previously but seem to experience enormous latency at times now. I am > talking about upwards of 5000 milliseconds (5 full seconds) for a return > on > a ping. It is intermittent. I am guessing interference but was wondering > if > anyone had seen anything else cause this. We have had limited success in > dealing with interference in 900 MHz previously so we are hoping there is > something else we can try before completely bailing on the band in those > locations. Any ideas are appreciated. > John Scrivner > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
