Force the equipment it is connected to to 10 Mb. ----- Original Message ----- From: "Kosinet Wireless" <wirel...@kosinet.com> To: "WISPA General List" <wireless@wispa.org> Sent: Wednesday, March 31, 2010 1:54 PM Subject: Re: [WISPA] Speaking of Tranzeo......
We've tried all of the settings available - Auto, 100, 10, etc., etc., etc. ----- Original Message ----- From: "Josh Luthman" <j...@imaginenetworksllc.com> To: "WISPA General List" <wireless@wispa.org> Sent: Wednesday, March 31, 2010 3:52 PM Subject: Re: [WISPA] Speaking of Tranzeo...... Can you force them to 100F or 10F? I would try 10F to see if that solves the problem first. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 3:49 PM, Kosinet Wireless <wirel...@kosinet.com> wrote: > It's a new radio / install. We've replaced the radio / ends / power supply > / > poe splitter / router / patch cable to the router. > > The Tranzeo AP at the POP hasn't has so much as "burped" - It's been rock > solid. I've got a Tranzeo at my house, up the tower with 50 + feet of cat5 > with a stock power supply, and it's been great. > > -Gary- > > ----- Original Message ----- > From: "Josh Luthman" <j...@imaginenetworksllc.com> > To: "WISPA General List" <wireless@wispa.org> > Sent: Wednesday, March 31, 2010 3:31 PM > Subject: Re: [WISPA] Speaking of Tranzeo...... > > > Yes. > > IME the whole Ethernet world of Tranzeo is just...bad... > > The plastic boot never sealed for me. I thought it had on the last > radio but I came to find out that it was filling with water (though > working GREAT for years). > > If I were you I'd make sure there is no obvious water build up and then > > 1) recrimp both ends > 2) replace radio > 3) replace line > > If you can see Ethernet errors put ferrite on after you recrimp. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > “Success is not final, failure is not fatal: it is the courage to > continue that counts.” > --- Winston Churchill > > > > On Wed, Mar 31, 2010 at 3:22 PM, Kosinet Wireless <wirel...@kosinet.com> > wrote: >> We've been primarily an Alvarion WISP in the past, but decided to use >> higher >> speed / lower cost gear for our expansion. Went with the Tranzeo 2.4 >> stuff >> for a new POP recently. Connected our first Client out there. After we >> read >> all of the words and realized that Vertical Polarity was the "other" way, >> we >> now have great signal. :-) >> >> The problem is, we're losing Ethernet connectivity on the inside to the >> Router. About every 10-15 minutes, it drops off, then comes back on its >> own >> after about 5 minutes. We've replaced Radios, Cable Ends, Power Supply, >> Router, Changed IP Addresses - Still drops off. >> >> It's a TR-CPQ unit in bridged mode - Any time that the Router is >> "off-line", >> I can still access the Radio. >> >> Has anyone else experienced anything like this? >> >> -Gary- >> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
