Hey all, I've got what appears to me to be a dumb question, but I'm all out of good answers right now.....
We've got mostly all Alvarion stuff on our WISP Network - All bridged, including the backhauls. The entire network is addressed @ 10.0.100.x for management / monitoring purposes, and has been running fine. (Our Public IP address space is 98.100.x.x) We recently added a Tranzeo AP, and (1) client at a new POP - Addressed them into our 10.0.100.x Network and set the client up. Signal is great, but we've had nothing but problems at this location. It will run for a short while, then drop off, then come back, etc. (And on, and on......) While testing we discovered we can ping the 10.0.100.x address, and / or stay logged onto the radio consistently, but the Router on the Public IP drops off. We've swapped Radios / Routers / Switches / Etc. - The only constant is the Tranzeo link. (The Client at the POP that we're broadcasting from work flawlessly - It's a Ubiquity Bridge Link.) There's the scenario, here's the question. Is there a problem with me addressing the Tranzeo Radios in the 10.0.100.x????? Arp Table problems? -Gary- -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/