Sometimes rebooting the CPE helps - Sometimes the router....... It just seems to come and go at random.
----- Original Message ----- From: "Josh Luthman" <j...@imaginenetworksllc.com> To: "WISPA General List" <wireless@wispa.org> Sent: Monday, May 03, 2010 5:16 PM Subject: Re: [WISPA] Tranzeo - Again..... What do you do to solve the problem? Reboot the AP or CPE? Customer router? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Mon, May 3, 2010 at 5:14 PM, Kosinet Wireless <wirel...@kosinet.com>wrote: > Well, kinda' > > It's ME -> UBNT 5.8 Bridge -> Switch -> Tranzeo AP ->Tranzeo CPE > > Client @ POP connected to switch with Router Works perfectly - Clent @ > Tranzeo CPE with Router has problems. > > -Gary- > > ----- Original Message ----- > From: "Ryan Spott" <rsp...@cspott.com> > To: "WISPA General List" <wireless@wispa.org> > Sent: Monday, May 03, 2010 5:09 PM > Subject: Re: [WISPA] Tranzeo - Again..... > > > > This smells of a layer 2.5 issue. > > > > Let me guess, the path looks like this: > > > > You -> AP -> CPE "acting like uplink" -> AP -> client. > > > > yeah.. Very well explained here: > > < > > > http://support.tranzeo.com/knowledgebase/users/kb.php?id=10038&category_id=0&sid2= > >> > > > > I am looking through the 802.11-2007 spec from IEEE as this is a WLAN > > issue, > > not a Tranzeo Issue. (my wife calls it the > > > "G**-D*****-ryan-these-customers-are-calling-because-you-used-the-poor-mans-repeater-again-go-put-a-freakin'-router-out-there-quit-being-so-cheap!!!!!) > > > > ryan > > > > > > On Mon, May 3, 2010 at 1:49 PM, Kosinet Wireless > > <wirel...@kosinet.com>wrote: > > > >> Hey all, > >> > >> I've got what appears to me to be a dumb question, but I'm all out of > >> good > >> answers right now..... > >> > >> We've got mostly all Alvarion stuff on our WISP Network - All bridged, > >> including the backhauls. The entire network is addressed @ 10.0.100.x > for > >> management / monitoring purposes, and has been running fine. (Our > >> Public > >> IP > >> address space is 98.100.x.x) > >> > >> We recently added a Tranzeo AP, and (1) client at a new POP - Addressed > >> them > >> into our 10.0.100.x Network and set the client up. Signal is great, but > >> we've had nothing but problems at this location. It will run for a > >> short > >> while, then drop off, then come back, etc. (And on, and on......) While > >> testing we discovered we can ping the 10.0.100.x address, and / or stay > >> logged onto the radio consistently, but the Router on the Public IP > drops > >> off. We've swapped Radios / Routers / Switches / Etc. - The only > constant > >> is > >> the Tranzeo link. (The Client at the POP that we're broadcasting from > >> work > >> flawlessly - It's a Ubiquity Bridge Link.) There's the scenario, here's > >> the > >> question. > >> > >> Is there a problem with me addressing the Tranzeo Radios in the > >> 10.0.100.x????? Arp Table problems? > >> > >> -Gary- > >> > >> > >> > >> > >> > -------------------------------------------------------------------------------- > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > >> > -------------------------------------------------------------------------------- > >> > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
