CPE is in Bridge mode - Yes it's at the Clients location (to a Router) We seem to be able to always connect to the AP / CPE on the 10.0.100.x Subnet - Even while dropping pings / connectivity @ the Clients location.
-Gary- ----- Original Message ----- From: "Josh Luthman" <j...@imaginenetworksllc.com> To: "WISPA General List" <wireless@wispa.org> Sent: Monday, May 03, 2010 5:09 PM Subject: Re: [WISPA] Tranzeo - Again..... Is the CPE nat'ed or bridged? Is this a customer's location? When the problem exists does anything pass through the link? Can the rest of the network reach the AP? CPE? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Mon, May 3, 2010 at 5:07 PM, Kosinet Wireless <wirel...@kosinet.com>wrote: > It's a PTMP setup - And yes, the problem is only on the far side. (CPE > location) > ----- Original Message ----- > From: "Josh Luthman" <j...@imaginenetworksllc.com> > To: "WISPA General List" <wireless@wispa.org> > Sent: Monday, May 03, 2010 4:54 PM > Subject: Re: [WISPA] Tranzeo - Again..... > > > Is this a Tranzeo ptmp or ptp link? > > Keep in mind Tranzeo is 802.11 and carries the MAC address problem with > devices behind the station. > > Are the issues isolated to the far side of the Tranzeo and nothing else? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > “Success is not final, failure is not fatal: it is the courage to continue > that counts.” > --- Winston Churchill > > > On Mon, May 3, 2010 at 4:49 PM, Kosinet Wireless > <wirel...@kosinet.com>wrote: > > > Hey all, > > > > I've got what appears to me to be a dumb question, but I'm all out of > good > > answers right now..... > > > > We've got mostly all Alvarion stuff on our WISP Network - All bridged, > > including the backhauls. The entire network is addressed @ 10.0.100.x > > for > > management / monitoring purposes, and has been running fine. (Our Public > > IP > > address space is 98.100.x.x) > > > > We recently added a Tranzeo AP, and (1) client at a new POP - Addressed > > them > > into our 10.0.100.x Network and set the client up. Signal is great, but > > we've had nothing but problems at this location. It will run for a short > > while, then drop off, then come back, etc. (And on, and on......) While > > testing we discovered we can ping the 10.0.100.x address, and / or stay > > logged onto the radio consistently, but the Router on the Public IP > > drops > > off. We've swapped Radios / Routers / Switches / Etc. - The only > > constant > > is > > the Tranzeo link. (The Client at the POP that we're broadcasting from > work > > flawlessly - It's a Ubiquity Bridge Link.) There's the scenario, here's > > the > > question. > > > > Is there a problem with me addressing the Tranzeo Radios in the > > 10.0.100.x????? Arp Table problems? > > > > -Gary- > > > > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
