Nothing, it will constantly stay on. Of course you cannot turn off the second radio.
On Sat, Sep 25, 2010 at 10:17 AM, Stuart Pierce <spie...@avolve.net> wrote: > > Are you serious ? What if the poe checkbox gets unchecked ? > > ---------- Original Message ---------------------------------- > From: Philip Dorr <wirel...@judgementgaming.com> > Reply-To: WISPA General List <wireless@wispa.org> > Date: Sat, 25 Sep 2010 08:37:58 -0500 > >>input power in the "secondary" port and use the "main" port to power >>the second radio >> >>On Fri, Sep 24, 2010 at 8:39 PM, Robert West <robert.w...@just-micro.com> >>wrote: >>> Eh?  What ya mean??? >>> >>> >>> -----Original Message----- >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>> Behalf Of Philip Dorr >>> Sent: Friday, September 24, 2010 9:14 PM >>> To: WISPA General List >>> Subject: Re: [WISPA] UBNT Nano5M Secondary RJ45 Port PoE Burnout! >>> >>> It works perfectly fine if you power through the secondary port. >>> >>> On Fri, Sep 24, 2010 at 8:05 PM, RickG <rgunder...@gmail.com> wrote: >>>> I was skeptical of the poe passthrough sicne I first saw it and this is >>>> why. >>>> On repeaters, it would be so tempting to just run one wire but I've >>>> stuck with two. It will be interesting to see if it gets fixed. Thanks >>>> for sharing! >>>> >>>> On Fri, Sep 24, 2010 at 8:50 PM, Robert West >>>> <robert.w...@just-micro.com> >>>> wrote: >>>>> >>>>> Today I finally figured out an Issue I’ve been having with a >>>>> NanoStation5M.  I have a customer who wanted service,  was in  trees >>>>> but had a hot signal out at the road.  Dug a 4 foot hole, put in 2 10 >>>>> foot sections of rigid conduit and 5 bags of concrete.  Ran an >>>>> underground line of Cat5e, double shielded and flooded cable with >>>>> ground wire to his house.  That was 5 months or so ago.  At the >>>>> beginning of August, he called me and said his neighbor wanted >>>>> service.  Same trees so I took the AirGrid down, put up a Nano5M and >>>>> plugged a Nano loco2 into the secondary port and shot it at a second >>>>> Nano Loco2 at his place.  Replaced my weird Airgrid >>>>> >>>>> >>>>> >>>>> Worked perfectly, everyone happy.  2 weeks ago I get a call, neighbor >>>>> not working.  I go out, no power light on the Nano at the pole.  I >>>>> figure, bad crimp…….  Take it down, make up a new wire to connect >>>>> the two, fires up. >>>>> All good.  2 days later, same issue.  I reset it all to defaults, >>>>> reconfigure, all okay.  2 days later, same thing.  I downgrade >>>>> firmware to 5.2.  Couple of days later, no signal again.  I’ll also >>>>> add I was getting some “weird† lag at the AP that this setup was >>>>> feeding off of.  So I was fighting two battles.  Then today, I find >>>>> that the PoE Pass Through check box is empty.  DUH!  I check it, >>>>> apply, comes back empty.  I do it again, same issue.  I go out and I >>>>> can connect my laptop through the secondary port but it will not give any >>>>> voltage. >>>>> >>>>> >>>>> >>>>> I checked my lag time issue at the AP.  GONE! >>>>> >>>>> >>>>> >>>>> I then checked in the UBNT forums………….  It’s an issue.  After >>>>> 20 days >>>>> PoE on the secondary Nano port starts to die.  Replaced it with >>>>> another Nano5M, working fine but looks like I’ll be coming up with >>>>> another MacGyver solution to service this dude………. >>>>> >>>>> >>>>> >>>>> Just so ya knows. >>>>> >>>>> >>>>> >>>>> Bob- >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> --------------------------------------------------------------------- >>>>> ----------- >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> >>>>> --------------------------------------------------------------------- >>>>> ----------- >>>>> >>>>> WISPA Wireless List: wireless@wispa.org >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> >>>> >>>> >>>> ---------------------------------------------------------------------- >>>> ---------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> ---------------------------------------------------------------------- >>>> ---------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >>-------------------------------------------------------------------------------- >>WISPA Wants You! Join today! >>http://signup.wispa.org/ >>-------------------------------------------------------------------------------- >> >>WISPA Wireless List: wireless@wispa.org >> >>Subscribe/Unsubscribe: >>http://lists.wispa.org/mailman/listinfo/wireless >> >>Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > ________________________________________________________________ > Sent via the WebMail system at avolve.net > > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
